Thank you for the link !
I hadn't realized the potential of these little wonders.
Indeed there is an econological aspect to print replacement parts at home. (you still have to have the model because not everyone is a 3D designer ^^)
Severin
Search found 13 results
- 09/03/14, 04:11
- Forum : 3D printers and 3D print: machines and technologies, hardware, software, use and optimization
- Subject : Envoy: 3D printer, embossed revolution!
- answers: 4
- views: 9325
- 03/02/11, 13:52
- Forum : Electricity, electronics and IT Hi-Tech, Internet, DIY, lighting, materials and new
- Subject : Tips choices change bulbs (bathroom and kitchen)
- answers: 14
- views: 12347
- 31/01/11, 11:55
- Forum : Electricity, electronics and IT Hi-Tech, Internet, DIY, lighting, materials and new
- Subject : Tips choices change bulbs (bathroom and kitchen)
- answers: 14
- views: 12347
please
Thank you for all your very complete and precise answers. It's not that easy to have good lighting ^ _ ^ I would like to ask another question: we also have hallogen floor lamps in the bedrooms / living room, I guess, without taking much risk, that it is not very economical ^^ ...
- 29/01/11, 20:08
- Forum : Electricity, electronics and IT Hi-Tech, Internet, DIY, lighting, materials and new
- Subject : Tips choices change bulbs (bathroom and kitchen)
- answers: 14
- views: 12347
Tips choices change bulbs (bathroom and kitchen)
Hello, I would like to get some advice on the choice of lighting / bulbs because with everything that exists today I feel a little lost. So here are 2 situations on which I would like your help: first in the kitchen, we have triple spots (see photo) with ...
- 21/03/10, 14:45
- Forum : Heating, insulation, ventilation, VMC, cooling ...
- Subject : Change of radiator elec in apartment
- answers: 3
- views: 3797
re
Thank you for your answer. For the budget, it is necessary to stay below 300 €. For insulation, I don't think we can do much about it. It's far from disastrous, but hey we are certainly far from what we would do in Canada ... (what do you call "chassis"?) Pou ...
- 09/03/10, 22:13
- Forum : Heating, insulation, ventilation, VMC, cooling ...
- Subject : Change of radiator elec in apartment
- answers: 3
- views: 3797
Change of radiator elec in apartment
Hello, I currently live in an apartment of about 60m², in a building built a little over a year ago. The heating is (unfortunately) individual, and it is therefore with electric radiators that I am heated. In the living room (+ open kitchen making a total of 40 m²) ...
- 06/01/07, 23:52
- Forum : Fossil fuels: oil, gas, coal and nuclear electricity (fission and fusion)
- Subject : Watch your GAS consumption !!!
- answers: 20
- views: 67408
- 04/01/07, 22:49
- Forum : Fossil fuels: oil, gas, coal and nuclear electricity (fission and fusion)
- Subject : Watch your GAS consumption !!!
- answers: 20
- views: 67408
yes finally the lighter flame I find it a little big anyway, I will try to find the company which takes care of the maintenance of the water heater if there is no way to manage because there ... and otherwise I have turned off the water heater for 1 hour and the meter did not move by 1 millieme so appeared ...
- 04/01/07, 18:50
- Forum : Fossil fuels: oil, gas, coal and nuclear electricity (fission and fusion)
- Subject : Watch your GAS consumption !!!
- answers: 20
- views: 67408
consumption
I returned, so here are the results of the gas consumption measurement in standby (no use): Between 12:35 p.m. and 17:55 p.m. (i.e. 320 min): 0.091 m3 <=> 1.008 kWh Or for 1 hour: 0,0170625 m3 <=> 0,1890525 kWh Or for 1 day: 0,4095 m3 <=> 4,537 kWh !!!! Or for 1 year: 149,4675 m3 <=> 1656,10 ...
- 04/01/07, 12:10
- Forum : Fossil fuels: oil, gas, coal and nuclear electricity (fission and fusion)
- Subject : Watch your GAS consumption !!!
- answers: 20
- views: 67408
Consumption
My first test was a very normal shower (by not letting the water flow when I wash myself), the result is the following: 0.195m3 or 2.161 kWh (the coefficient of conversion used is that of the GDF invoice or 11.08) I then took a measurement this morning in order to check ...