issue any beast on the rod

Water injection in thermal engines and the famous "pantone engine". General informations. Press clippings and videos. Understanding and scientific explanations on the injection of water into engines: ideas for assemblies, studies, physico-chemical analyzes.
campadebulsance
I learn econologic
I learn econologic
posts: 18
Registration: 23/04/05, 20:23
Location: avignon 84

issue any beast on the rod




by campadebulsance » 01/09/05, 20:54

by welding points of course !!!

not serious! it is centered by welding tack at 120deg or differently if you find better (knowing that the welding spots are very simple to make)
0 x
Rulian
I posted 500 messages!
I posted 500 messages!
posts: 686
Registration: 02/02/04, 19:46
Location: Caen




by Rulian » 01/09/05, 21:02

I abound !!

Three points of star welding at each end of the rod, a stroke of the file to put it all at the right size and presto !! you fit (not like a brute !!) all in the inner tube.

I asked myself the same question ... :D
0 x
User avatar
pinkfloyd30
I learn econologic
I learn econologic
posts: 18
Registration: 30/08/05, 12:04




by pinkfloyd30 » 01/09/05, 22:23

ahhh i also said to myself, thank you, but does the fact of passing current through the rod (because there is when we do welding is not it ???) does it will not create an imbalance in magnetization or something like that
0 x
"How can we not admire the force that man uses to saw the branch on which he is sitting ???" Jean-Marie Bigard
User avatar
Rabbit
Grand Econologue
Grand Econologue
posts: 823
Registration: 22/07/05, 23:50
x 2




by Rabbit » 01/09/05, 23:34

No danger if you have taken the precaution to place the accessory A
on the reactor
when soldering (very important: aligned
ds the direction of the reactor cord side arrives bubbler)
As well as accessory B
on the welding station (NE direction)

Caution: do not confuse the 2 (can cause serious injury
to the experimenter's brain due to released radiation)

Object A:
http://titwane.free.fr/div%20grigri9.jpg

Object B:
http://titwane.free.fr/div%20grigri6.jpg

: Huh:
0 x
User avatar
Cuicui
Econologue expert
Econologue expert
posts: 3547
Registration: 26/04/05, 10:14
x 6




by Cuicui » 03/09/05, 19:32

Sorry Pinkfloyd but Rabbit mechanic has confirmed giggled under his breath. Magnetism has nothing to do in the stem of the Pantone during construction. Soda as you want peace in the soul :P
0 x
User avatar
pinkfloyd30
I learn econologic
I learn econologic
posts: 18
Registration: 30/08/05, 12:04




by pinkfloyd30 » 03/09/05, 20:01

ok merci :D, I had hesitated to answer, I could have gone even further. By cons, it has nothing to do with the subject but, do I have to leave the fuel or then I have to manage the intake with the valves if I mount the reactor on a moped? (not because it has to be loud to speed up with valves but hey, at least we can let go of the handlebars without slowing down :D)
0 x
"How can we not admire the force that man uses to saw the branch on which he is sitting ???" Jean-Marie Bigard

 


  • Similar topics
    Replies
    views
    Last message

Go back to "Water injection in heat engines: information and explanations"

Who is online ?

Users browsing this forum : No registered users and 137 guests