Hello everyone
I'm struggling with a woodstar brushcutter that would do a good job for a friend in her jungle.
The beast starts and chokes on acceleration
Disassembled and clean
Strainer
Hose
sunseeker 633 carb (no adjustment)
Air filter
I lose my Latin
If a brave soul could help me it is for a good cause.
Thank you in advance
Woodstar scrambler who wants to bother me
- Obamot
- Econologue expert
- posts: 28725
- Registration: 22/08/09, 22:38
- Location: regio genevesis
- x 5538
Re: Woodstar Scrambler who wants to annoy me
If it helps:
Replace (clean?) spark plug and check electrode gap? Check the type of fuel (2-stroke?) required.
choking problem,
— Some people report that the wire has a lot of trouble getting out, and it eats up power..
— Others report an out of order blade drive sprocket
One defect causing the other in the long run?
We can detect on the photo strong traces of corrosion on the nuts... To see if the evil of oxidation is not deeper.
Good luck!
Replace (clean?) spark plug and check electrode gap? Check the type of fuel (2-stroke?) required.
choking problem,
— Some people report that the wire has a lot of trouble getting out, and it eats up power..
— Others report an out of order blade drive sprocket
One defect causing the other in the long run?
We can detect on the photo strong traces of corrosion on the nuts... To see if the evil of oxidation is not deeper.
Good luck!
1 x
Re: Woodstar Scrambler who wants to annoy me
Chinese 2-stroke engine... Check the intake seals.. And you must have an adjustment on the carb... It's just that the screw (in bronze on the side) has no imprint, it is factory set and can no longer be touched (with pliers it does)
1 x
The only thing safe in the future. It is that there may chance that it conforms to our expectations ...
Back to "failure, troubleshooting and repair: repair yourself? "
Who is online ?
Users browsing this forum : No registered users and 71 guests