Replace an ot239 m9016 triac on a broken masterchef 750 robot

Environmental impact of end of life products: plastics, chemicals, vehicles, agri-food marketing. direct recycling and recycling (upcycling or upcycling) and reuse of good items for the trash!
polo69
I discovered econologic
I discovered econologic
posts: 4
Registration: 21/04/21, 09:59
x 2

Replace an ot239 m9016 triac on a broken masterchef 750 robot




by polo69 » 21/04/21, 10:11

on the printed circuit of my masterchef 750 robot I have a triac burnt out due to a bad connection

inscription on the triac Ph for Philips ot 239 m9016

Being zero in electronics can someone give me a correspondence of an equivalent triac of the current trade
because I found it made in china with exorbitant transport costs 30 times its price
0 x
Christophe
Moderator
Moderator
posts: 79126
Registration: 10/02/03, 14:06
Location: Greenhouse planet
x 10974

Re: Replace an m9016 triac on a broken masterchef 750 robot




by Christophe » 21/04/21, 10:41

Hi and welcome here!

Not so bad if you have already been able to identify the fault and the HS component!

To find the part, look here: https://www.gotronic.fr/rechercher.htm

Can you take a photo of the triac and post it here? The triacs are identified in BT or TO I haven't found ot?
0 x
polo69
I discovered econologic
I discovered econologic
posts: 4
Registration: 21/04/21, 09:59
x 2

Re: Replace an m9016 triac on a broken masterchef 750 robot




by polo69 » 21/04/21, 15:06

Thank you for your answer I think we must understand OT by TO but I do not find it tj?
I attach a photo of the broken component

triac.jpg
broken component photo
1 x
User avatar
Forhorse
Econologue expert
Econologue expert
posts: 2485
Registration: 27/10/09, 08:19
Location: Perche Ornais
x 359

Re: Replace an m9016 triac on a broken masterchef 750 robot




by Forhorse » 21/04/21, 15:24

I didn't find an easily accessible datasheet for this component so it's not easy to find an equivalent. After seeing the application it must not be super critical. Without too much trouble I would say for example that a BTA16-600BW will replace it without problem
0 x
Christophe
Moderator
Moderator
posts: 79126
Registration: 10/02/03, 14:06
Location: Greenhouse planet
x 10974

Re: Replace an m9016 triac on a broken masterchef 750 robot




by Christophe » 21/04/21, 15:31

There are some electronics technicians on the forum (I'm not) who will surely find you an equivalent ...

This looks like a (very) old reference!

The research in French gives nothing but I found that in English: it's not a triac in fact ... but a thyristor.

https://pinkfishmedia.net/forum/threads ... lp.188843/

Found a discontinuation notice which lists the OT239 as a "Gen. Purpose Thyristor" (not a triac) and BT258-800R as the recommended replacement.

Contradicted by:

I don't think the BT258 is current either but as I have seen the TS820-600T listed as the nearest equivalent to that as well,

And for the Triac VS Thyristor difference:

Thyristor is unidirectional device but TRIAC is bidirectional device.
Thyristor controls only DC power but TRIAC controls DC as well as AC power.
Thyristor is more reliable but TRIAC is less reliable.
Thyristor operate at large current rating but TRIAC operate at less current rating.
0 x
polo69
I discovered econologic
I discovered econologic
posts: 4
Registration: 21/04/21, 09:59
x 2

Re: Replace an ot239 m9016 triac on a broken masterchef 750 robot




by polo69 » 21/04/21, 17:53

Thank you for the answer the thyristor proposed TS820 600 cannot be found by me
How to find him?
0 x
User avatar
GuyGadeboisTheBack
Econologue expert
Econologue expert
posts: 14825
Registration: 10/12/20, 20:52
Location: 04
x 4302

Re: Replace an ot239 m9016 triac on a broken masterchef 750 robot




by GuyGadeboisTheBack » 21/04/21, 18:08

polo69 wrote:Thank you for the answer the thyristor proposed TS820 600 cannot be found by me
How to find him?

https://www.mouser.fr/ProductDetail/STM ... 0LAA%3D%3D (Found in 10 seconds)
0 x
User avatar
Obamot
Econologue expert
Econologue expert
posts: 28725
Registration: 22/08/09, 22:38
Location: regio genevesis
x 5538

Re: Replace an ot239 m9016 triac on a broken masterchef 750 robot




by Obamot » 21/04/21, 19:24

Here 3 links:

https://www.jotrin.com/product/parts/OT239

https://es.excesschip.com/product/details/OT239

Both give as a substitute an OT220

This triac (if it is one) would be a protection against over-voltage. If you say you don't know the electronics well, be careful that you have to wind it up in the same direction (the “gate” is on the right, I think) ...


Here the doc given by jotrin https://www.datasheetarchive.com/pdf/do ... %2520ot239
but I obviously don't know if it's the right one.

Here we also give references OT220 with sometimes as additional indications 600V (but not always): https://www.tme.eu/fr/katalog/triacs_10 ... 1854719%3B
0 x
polo69
I discovered econologic
I discovered econologic
posts: 4
Registration: 21/04/21, 09:59
x 2

Re: Replace an ot239 m9016 triac on a broken masterchef 750 robot




by polo69 » 23/04/21, 21:13

I found on the internet my printed circuit for Robot MasterChef 750 with another reference for the triac (thyristor)? TYS 605-480 C250
I think this component is responsible for varying the speed of the motor
I attach a photo this electronic card it is no longer available for sale
can someone educate me about this component
Attachments
control circuit.jpg
circuit de command.jpg (211.59 KiB) Viewed 8148 times
1 x

Back to "waste, recycling and reuse of old objects"

Who is online ?

Users browsing this forum : No registered users and 72 guests