Hello,
I heat a 75m2 home with an Edilkamin Ecoidro pellet stove, coupled to a mixing bottle, and then a heated floor and 3 radiators, all regulated by a RVP210 from Siemens. The DHW is heated directly by the stove via a bypass valve controlled by the RVP.
I have a problem of setting the stove, because as soon as the house is hot, and the regul stops its pumps, the temperature goes up, and the stove goes into safety H2o temp.
I tried to put it in eco function, with a T ° eco of 75 °, and a T ° stove of 60 °, but in this case, it does only stop and restart when it reaches the limit values . The technician advised me to put an aquastat on the mixing bottle to control the stove directly via the switch on the motherboard, with an off to 75 °, and an 45 ° + a variable tempo between the off and the one to avoid too frequent starts. This could possibly work for the heating, but not for the DHW, because I directly heat the preparator via the bypass valve that shunts the mixing bottle.
Does anyone have a similar installation, and how did he solve the problem?
Thank you in advance.
Pellet stove adjustment Edilkamin Ecoidro
Re: Pellet stove adjustment Edilkamin Ecoidro
Hello, I have a similar installation (Ecoidro + mixing bottle + heating floor regulated by RVP201 Siemens without DHW.I do not encounter the same problem.The eco function works but causes frequent restarts once the temperature reached.It lacks a hysteresis ( Restart t ° weaker than stop t) ... I do not know if any settings are possible.In the setting manual is parameter does not appear ...
0 x
-
- Similar topics
- Replies
- views
- Last message
-
- 10 Replies
- 2824 views
-
Last message by Clemclem
View the latest post
26/12/23, 11:05A subject posted in the forum : Heating, insulation, ventilation, VMC, cooling ...
-
- 1 Replies
- 1827 views
-
Last message by ArthurD
View the latest post
17/11/23, 16:59A subject posted in the forum : Heating, insulation, ventilation, VMC, cooling ...
-
- 33 Replies
- 6332 views
-
Last message by Obamot
View the latest post
25/02/23, 19:49A subject posted in the forum : Heating, insulation, ventilation, VMC, cooling ...
-
- 2 Replies
- 3027 views
-
Last message by Cocktail07
View the latest post
03/01/23, 19:54A subject posted in the forum : Heating, insulation, ventilation, VMC, cooling ...
-
- 24 Replies
- 18102 views
-
Last message by EasyGui
View the latest post
16/02/23, 16:58A subject posted in the forum : Heating, insulation, ventilation, VMC, cooling ...
Back to "Heating, insulation, ventilation, VMC, cooling ..."
Who is online ?
Users browsing this forum : Majestic-12 [Bot] and 266 guests