Emission of smoke boiler Okofen
Re: Smoke Emissions Okofen Boiler
Yes, there is a parameter that allows you to adjust the input of pellets. But on SMART, I do not know what it's called. And normally, it is in the rank two parameters, not accessible to the user, reserved for technicians.
0 x
Re: Smoke Emissions Okofen Boiler
Yes thank you I think I know which one.
But the boiler has been running normally during 1 a year hence the worry should not come from there ..
But the boiler has been running normally during 1 a year hence the worry should not come from there ..
0 x
-
Philippe Schutt
- Econologue expert
- posts: 1611
- Registration: 25/12/05, 18:03
- Location: Alsace
- x 33
Re: Smoke Emissions Okofen Boiler
It should be possible to measure the air flow in the intake tube. This would make it possible to slice once and for all between insufficient air volume and excess pellets.
Typically this should vary from 150l / min in min power (2.5kw) to 250 l / min (18kw) and above 300 l / min when the extractor is running at full speed.
I made a measuring device for devices that do not have one.
You are in Alsace?
Typically this should vary from 150l / min in min power (2.5kw) to 250 l / min (18kw) and above 300 l / min when the extractor is running at full speed.
I made a measuring device for devices that do not have one.
You are in Alsace?
0 x
-
Philippe Schutt
- Econologue expert
- posts: 1611
- Registration: 25/12/05, 18:03
- Location: Alsace
- x 33
Re: Smoke Emissions Okofen Boiler
If you want, I can pass one of these 4 and we measure if ke volume of air is enough
0 x
Back to "Heating, insulation, ventilation, VMC, cooling ..."
Who is online ?
Users browsing this forum : No registered users and 358 guests