Topic to talk about 3D printing temperatures.
In order to find the ideal temperatures, ideal, on the extrusion and the bed following the plastic (ABS or PLA)
To begin, I present you the 1ère heater of my K8200 under repetier:
a) extruder set at 190 ° C
b) heating bed set at 50 ° C
c) extrusion fan: 51 / 100
It is well sized because temperatures reach the set point almost at the same time (at 20 ° C ambient)
The regulation of the heating bed is perfect, that of the extruder a little less good (I will put an insulating sleeve and thermal paste on the sensor).
The decrease after a few minutes corresponds to the start of the fan (blowing on the extruder), we can adjust it between 0 and 100% ... so here too a good setting to find
Repetier: temperatures settings on K8200 / 3Drag
-
- Moderator
- posts: 79121
- Registration: 10/02/03, 14:06
- Location: Greenhouse planet
- x 10973
-
- Moderator
- posts: 79121
- Registration: 10/02/03, 14:06
- Location: Greenhouse planet
- x 10973
I thermally isolated the extrusion nozzle and the T ° is much more stable ... and the print quality seems improved ... comparative pictures coming soon (printing in progress of my 1er object since the change there .. .)
0 x
Do a image search or an text search - Netiquette of forum
Who is online ?
Users browsing this forum : No registered users and 34 guests