Fire pit with log loading from behind?

[fc89]

Re,

Verdes wrote!

at worst I fall back on this model.

What are you saying??? Try to find what you're looking for.

You see, what bothers me is the term used, "at worst"




Damn, I worked on this change.

A+

[loop]

Good evening,

The simplest solution in my opinion, buy this type of insert and replace one of the panes with a sheet metal plate.

In the photo, it is a boiler model (water circulation on the sides and above)

A+

[green]

Years ago in Brittany I saw one with opening from the back with a cast iron door and the person bought it as is in the trade, but I have no idea from where I have seen .....
fc89: when I say the worst, it's buying one with double glass door and modifying it, so it's not that "worse" than that

looping: the insert in photo is ideal in shape and gabari but I do not intend to connect a water circuit, I am just looking for a simple fireplace.

at Supra there is possibly the 583 N double-sided fireplace

[loop]

Bonjour,

I'm just looking for a simple home

Just ask

A+

[green]

And one with a metal rear door? and cheap? and near my house?
Well the photos, but is there a mark? a ref?
Do you want to make me go crazy?

[loop]

Good evening,

with metal rear door

This one no, but just ask for it without the window, that's already won.

and cheap

It depends on what you call cheap.
The last on the photo above costs more than 1000 euros.

close to my house

There I am next to the plate.
The brand that offers these products is in Poland.

I send you the link to their site in MP.

Keep us in touch .

A+

[green]

Alright
Thank you for the link.
The prices are more than correct if the quality is there.
I think the Zuzia 16 Kw double sided will do the trick, even without replacing the glass with a metal plate.
Thank you again

[green]

Upon reflection, the double-sided Supra 583 N will do the trick.
More expensive but Supra inspires + confidence I find.
In terms of power, it is given for 10 Kw and I calculated that 6,5 Kw are necessary (by calculating wide) to heat the 130 m3 of the room.
Worth a good thing done

[green]

The fireplace is ordered, and I wonder what material is ideal for making a box as in the sketch below.
The thicker lines correspond to the angles of the ceiling.
I do not plan to install a fan but just grates to distribute the heat.
I read that there needs to be an air intake under the fireplace, what size and what position?
Is it a hole that communicates with the outside and that opens into the fireplace or the room?
There are no openings on the fireplace (according to the photos) like on my other fireplace (a zipper to increase the circulation)
Goods.