Oops yes I will put new nuts.

The reel is entirely mechanical and is driven by a chain.
Thanks anyway

Here it is to repair the engine always turns in the good direction and starts without assistance! It was one of the capacitor's leads that was in the wrong place. So I straightened out and planed all the afternoon and the .... BING new failure the planer drive roller no longer drives. Too cre ...

Well, I don't know anything about it, but I think I plugged the capacitor wrong, I'm going to make my brain smoke!

"before any cable here?"
I have just checked all my photos none at a good enough angle to check it so the doubt is more than allowed.
I will try to look carefully at this wiring diagram

I had not seen your photos I will recheck one more time.
In any case whether I solve the problem or not I thank you all for your help

The photos of the front wiring are at the beginning of the shift. Redo the wiring 1 by n was not possible since it was necessary to open the box so I entered the locations in 1 file and replaced them in the right place if I did not make a mistake. I took a thousand precautions but? The error is huma ...

I confirm :
Once started (in the right direction) the motor does not lose power. I just carried out a test with the jointer.

OK, thanks
Is it because of that once upside down once upside down?
Or is it so that it starts without help?
Can I use the machine while I wait?
Is that the capacitor?
What kind of current capacitor would be compatible with this one?
Thank you

Hello everyone .. Action taken: Remove the 2 large parts on the motor shaft. Remove fan cover Open the motor for checking if no other problem (while I'm at it) Remove the shaft to see if it can be turned over (there is one side of the shaft that protrudes more than ...

Thank you that s what I will try to do as soon as possible and as soon as it is done you will keep informed and send a photo.