Stirling factory in India?

[phil53]

Excuse me, I just edited and corrected.
I'm not sure where it is made, probably in China

http://www.alibaba.com/product-free/100 ... rator.html

[Christophe]

Ah well, alibaba and the 40 ... jvois lets complete! hihihiihih
For your link, apparently it's made by ... Envirabvle Technologies & Systems at Pakistan

Frankly their "customer" file stinks of scam
6000km: http://www.alibaba.com/member/envirable.html

Free energy generator

[elephant]

Read on the link given by Phil 53 :

We are selling fuel less permanent magnetic free energy generator, powered by permanent magnets, for joint venture and licensing

Excuse me, Christophe, I had not read your last intervention

[the middle]

Really, this stirling st-5, seems valid (I will try to add the photos)

Stirling Technology Inc.

ST5 engine
The ST-5 is built by Stirling Technology of Athens, Ohio USA. This engine operates with pressurized air of 5 bar, by means of a built in air compressor, and has been designed for long periods of shutdown for residential and agricultural use on a small scale and for industrial purposes. . Any application that requires long life and motive power for hours of operation is a good candidate for the ST-5. Recommended uses are power generation, pumping water and power implements on a small scale, compressors, etc.
The engine is rated at 5 hp and can impure out of natural gas, crude oil or biomass. A small-scale rice system could use part of the waste husk as fuel and small-scale milk from condensing plants, to use engine heat as well as mechanical power.
By the use of simple heat exchangers, waste heat can be used for home heating, dairy or greenhouse products as well as providing domestic hot water needs. At full production, the engine produces more than 25 kW of recoverable heat.

Realization of the co-generation of "Home Power" reception system!
Can provide electricity and heat for the house by small, independent and dispersed central.


We are the exclusive agent for Japan of "BIOWATT" developed by Sunpower Inc (USA) and licensed to External Power, LLC (USA)







This Home Power (Biowatt) is a biomass feeds the Stirling engine system consisting of a biomass combustion chamber, Stirling engine, linear generator, fuel control system and fuel system, etc. The linear generator connected to a piston free can generate electricity of 1kw an hour.
To obtain 1kw of power, approximately 1,4 kg of biomass will be needed as fuel.

The photo on the left shows the electricity generation system by turning on the light bulbs.

An automatic continuous operating test for 6 hours is carried out with 6 kg of solid fuel biomass (pellet) in a fuel box.

Biomass waste such as husked rice sawdust and can be used as fuel for the system.

[the middle]

https://www.econologie.info/share/partag ... y8RC8c.doc

[the middle]

Houla, biowatt !!, prettyiii
http://translate.google.be/translate?hl ... r%26sa%3DG

[esgege]

It's an old thing the ST-5
© 1995 Dieter Viebach

http://projetstirling.fr/index.php?opti ... &Itemid=28

http://www.geocities.com/viebachstirling/home.htm

I think we still find plans ...

Too bad he doesn't make it anymore ... and astonishing that nobody gets started given the demand

[the middle]

It's an old thing the ST-5
© 1995 Dieter Viebach

http://projetstirling.fr/index.php?opti ... &Itemid=28

http://www.geocities.com/viebachstirling/home.htm

I think we still find plans ...

Too bad he doesn't make it anymore ... and astonishing that nobody gets started given the demand

It is still manufactured, but at what price!
I wrote to them, in the USA, and here is the answer:

Our current situation with the ST-5 is as follows:
We are putting together a plan for batch production of ST-5s with biomass (particle fuel) burners. While it will be about 1 year before we can deliver (sooner depending on our response), our offering price for engine + particle fuel burner is $ 9,000 (US) plus shipping. In order to configure a system to generate electricity or charge batteries, you would need to add a belt-driven generator, a radiator and fan, and a small water pump (all engine-driven). In addition you would need a battery charger and inverter if you are charging batteries, or a frequency / voltage controller, simple or sophisticated depending on load demands, if you intend to use AC directly from the generator. We can offer guidance in this process.
Water pumping is the simplest application for this engine. All that is required is a belt driven water pump and a tap off the pumped water to cool the engine. We can also configure a system to drive a refrigeration compressor.
Specifications for the ST-5 can be found at stirling-tech.com, under literature, "Total Energy Independence".
The ST-5 is not suitable for use with a solar concentrator (operation would require a solar concentrator collector of 38 sq. Meters), but if you have biomass and a use for additional heat, it will be ideal.
Can I put you on my list of highly-interested, future customers / system integrators?

$ 9000, plus shipping, plus customs, plus a year of waiting ...

[ECOTECO]

It's an old thing the ST-5
© 1995 Dieter Viebach

http://projetstirling.fr/index.php?opti ... &Itemid=28

http://www.geocities.com/viebachstirling/home.htm

I think we still find plans ...

Too bad he doesn't make it anymore ... and astonishing that nobody gets started given the demand

It is still manufactured, but at what price!
I wrote to them, in the USA, and here is the answer:

Our current situation with the ST-5 is as follows:
We are putting together a plan for batch production of ST-5s with biomass (particle fuel) burners. While it will be about 1 year before we can deliver (sooner depending on our response), our offering price for engine + particle fuel burner is $ 9,000 (US) plus shipping. In order to configure a system to generate electricity or charge batteries, you would need to add a belt-driven generator, a radiator and fan, and a small water pump (all engine-driven). In addition you would need a battery charger and inverter if you are charging batteries, or a frequency / voltage controller, simple or sophisticated depending on load demands, if you intend to use AC directly from the generator. We can offer guidance in this process.
Water pumping is the simplest application for this engine. All that is required is a belt driven water pump and a tap off the pumped water to cool the engine. We can also configure a system to drive a refrigeration compressor.
Specifications for the ST-5 can be found at stirling-tech.com, under literature, "Total Energy Independence".
The ST-5 is not suitable for use with a solar concentrator (operation would require a solar concentrator collector of 38 sq. Meters), but if you have biomass and a use for additional heat, it will be ideal.
Can I put you on my list of highly-interested, future customers / system integrators?

$ 9000, plus shipping, plus customs, plus a year of waiting ...

I did the same thing as you on November 5, 2009 and I had exactly the same answer on November 9, 2009
I asked for a shorter delay, knowing that apparently this engine is made in India.
I even proposed to only supply the foundries and that we could machine the parts in France to save time.
I await the answer, I have some doubts, however there are full of information and sites concerning this engine.
I would like to make it or at least already try it because there is potential and it is simple.
I have a site where I tinker www.ecoteco.fr , there may be things that will interest you.
I will keep you posted if I ever have an answer.

Salutations to all

[Flytox]

Lots of interesting stuff on this site (ECOTECO) including an original synthesis of the various econologico subjects:

https://www.econologie.info/share/partag ... DRsNXb.pdf