Hello
Your flame safety, not sure it's a real thermo couple
Is it a rigid and waterproof copper pipe that comes out?
Most often the pipe does not contain 2 electric wires but a liquid. When it is heated its volume / pressure increases and switches a pressure switch.
This contact will more or less directly control the passage of the fuel.
A+
Achieve its temperature probes
0 x
Reason is the madness of the strongest. The reason for the less strong it is madness.
[Eugène Ionesco]
http://www.editions-harmattan.fr/index. ... te&no=4132
[Eugène Ionesco]
http://www.editions-harmattan.fr/index. ... te&no=4132
Hello again
Not sure if I advanced the schimbilik with my explanations.
On the forum next, they seem to know the problem much better than I do:
http://forums.futura-sciences.com/thread146678.html
A+
Not sure if I advanced the schimbilik with my explanations.
On the forum next, they seem to know the problem much better than I do:
http://forums.futura-sciences.com/thread146678.html
A+
0 x
Reason is the madness of the strongest. The reason for the less strong it is madness.
[Eugène Ionesco]
http://www.editions-harmattan.fr/index. ... te&no=4132
[Eugène Ionesco]
http://www.editions-harmattan.fr/index. ... te&no=4132
-
- I learn econologic
- posts: 14
- Registration: 30/03/05, 09:27
- Location: Waterloo .be (Belgium)
Hello,
no it's a thermo couple, it's not a thermostat, the cable is a solid rigid cable
the thermocouple feeds an electromagnet coil (as explained on the Flytox link).
in fact, apart from the temperature range, does it change whatever the probe is type K or A to Z?
no it's a thermo couple, it's not a thermostat, the cable is a solid rigid cable
the thermocouple feeds an electromagnet coil (as explained on the Flytox link).
in fact, apart from the temperature range, does it change whatever the probe is type K or A to Z?
0 x
http://www.pagethib.be.tf Adapting a gas burner or oil to PMC
If I say no nonsense the difference comes from the sensitivity and the margin of error on the measurement.
For example, type S has a lower sensitivity than type K, so a small error on the measurement of the voltage will lead to a larger error on the temperature than with type K.
There are also stories of more or less linear temperature / voltage curves.
For example, type S has a lower sensitivity than type K, so a small error on the measurement of the voltage will lead to a larger error on the temperature than with type K.
There are also stories of more or less linear temperature / voltage curves.
0 x
Back to "Water injection in the engines: the assembly and experimentation"
Who is online ?
Users browsing this forum : No registered users and 164 guests