Hello everyone !
At least one forum crazy ! and which nevertheless among the delusions of all, we worry about the future of our dear and tender planet that we are mistreating. : angry:
Me the first ... I work in the textile finishing, and it is recognized the dye ... it pollutes!
But hey have to work. My factory and equipped with a high-end wastewater treatment plant (capacity for an average city) no extraordinary discharge, recovery of calories from wastewater, automated systems to use the minimum of chemicals ... the total what! or almost because it's never too much! (excuse I'm shy and I'm not used to talking on the net): rolleyes:
All this to come to:
is there anyone who is (certainly) interested in equipping a fuel oil boiler? if so can he give me his opinion and advice?
I would like to try it on a frying pan before embarking on a large-scale project: blink:
Thanks in advance.
boiler
-
- I understand econologic
- posts: 178
- Registration: 17/12/04, 16:11
- Location: 81 - South Tarn
- x 10
Welcome,
you will find information
https://www.econologie.com/forums/chauffage- ... vt255.html
But there must be other posts ...
Good luck
you will find information
https://www.econologie.com/forums/chauffage- ... vt255.html
But there must be other posts ...
Good luck
0 x
RPS (Dpt Tarn South 81)
i-Only those who do nothing are never wrong
ii-Anything is possible as long as a little time is spent there
i-Only those who do nothing are never wrong
ii-Anything is possible as long as a little time is spent there
-
- I learn econologic
- posts: 14
- Registration: 30/03/05, 09:27
- Location: Waterloo .be (Belgium)
Hello,
It must have been good 1 year, if not two that I started to think about adapting a pmc on a burner and in all this time I have not yet done any concrete experimentation.
any time, I can help you, advise you.
I'm listening to you
It must have been good 1 year, if not two that I started to think about adapting a pmc on a burner and in all this time I have not yet done any concrete experimentation.
any time, I can help you, advise you.
I'm listening to you
0 x
http://www.pagethib.be.tf Adapting a gas burner or oil to PMC
-
- Moderator
- posts: 79323
- Registration: 10/02/03, 14:06
- Location: Greenhouse planet
- x 11042
Hi Thibounet, nice to see you back here We can say that you are the pantone boiler specialist I think ...
ps: I corrected your signature, so that people can go directly to your site.
ps: I corrected your signature, so that people can go directly to your site.
0 x
Do a image search or an text search - Netiquette of forum
-
- I learn econologic
- posts: 14
- Registration: 30/03/05, 09:27
- Location: Waterloo .be (Belgium)
merci,
but we must not forget zeplomb which already made him fall for trial
but we must not forget zeplomb which already made him fall for trial
0 x
http://www.pagethib.be.tf Adapting a gas burner or oil to PMC
-
- I learn econologic
- posts: 14
- Registration: 30/03/05, 09:27
- Location: Waterloo .be (Belgium)
for the record, I resumed my design work.
I am currently developing the automation of the burner via a programmer. There will also be a security system which will detect the flame with probably a photocell.
and I'm going to make a programmer soon with limit switches, so everyone can make their programmer.
I will also make a flash animation to help me make the programmer (cut the cams) and wire it, and on this animation we will see the operation of the different contacts.
and then I would also like to make a flash animation showing the operation of all the electrical circuit during the operation of the burner, but it requires a lot of work so it remains an idea for now.
+ + +
I am currently developing the automation of the burner via a programmer. There will also be a security system which will detect the flame with probably a photocell.
and I'm going to make a programmer soon with limit switches, so everyone can make their programmer.
I will also make a flash animation to help me make the programmer (cut the cams) and wire it, and on this animation we will see the operation of the different contacts.
and then I would also like to make a flash animation showing the operation of all the electrical circuit during the operation of the burner, but it requires a lot of work so it remains an idea for now.
+ + +
0 x
http://www.pagethib.be.tf Adapting a gas burner or oil to PMC
-
- Similar topics
- Replies
- views
- Last message
-
- 1 Replies
- 3231 views
-
Last message by loop
View the latest post
02/06/08, 13:14A subject posted in the forum : Water injection in engines: montages and experiments
-
- 0 Replies
- 6932 views
-
Last message by 109TombRaider
View the latest post
28/03/07, 20:10A subject posted in the forum : Water injection in engines: montages and experiments
Back to "Water injection in the engines: the assembly and experimentation"
Who is online ?
Users browsing this forum : No registered users and 260 guests