Okofen pellematic regulator adjustment CMP1.4 2007

Heating, insulation, ventilation, VMC, cooling ... short thermal comfort. Insulation, wood energy, heat pumps but also electricity, gas or oil, VMC ... Help in choosing and implementation, problem solving, optimization, tips and tricks ...
Jean-Jacques
I learn econologic
I learn econologic
posts: 18
Registration: 26/02/15, 19:00




by Jean-Jacques » 01/03/15, 18:07

ok I change and tell you ...
please
0 x
Jean-Jacques
I learn econologic
I learn econologic
posts: 18
Registration: 26/02/15, 19:00




by Jean-Jacques » 04/03/15, 14:49

so as promised, here are my results I went to 27minutes cycle with 12 ° ext, (25 'on the schema) I find it pretty good!

Image
0 x
Christophe
Moderator
Moderator
posts: 79112
Registration: 10/02/03, 14:06
Location: Greenhouse planet
x 10972




by Christophe » 04/03/15, 15:11

Jean-Jacques, just a small functional remark: if you could use the image host of the site it would be better (otherwise your images may disappear sooner or later). The link is above the window for editing a message ... Thank you.

(I corrected for the 3 you posted on this subject)
0 x
Jean-Jacques
I learn econologic
I learn econologic
posts: 18
Registration: 26/02/15, 19:00




by Jean-Jacques » 04/03/15, 16:34

ok it is noted - thanks for the changes.
jj
0 x
dirk pitt
Econologue expert
Econologue expert
posts: 2081
Registration: 10/01/08, 14:16
Location: isere
x 68




by dirk pitt » 05/03/15, 20:41

could you tell what settings you got that. for example, I see that the start is 63 °. it's too low.
we see that it descends from 3 ° when starting. it should start up to 67 about. although the amplitude will be smaller, it does not mean that the cycle will be shorter.
also the modulation seems to work well but it takes too long to get to 1. you have to go down a little P263.
0 x
Image
Click my signature
Jean-Jacques
I learn econologic
I learn econologic
posts: 18
Registration: 26/02/15, 19:00




by Jean-Jacques » 05/03/15, 22:51

Good evening,
so the settings
p263 = 68
p202 = 80
p281 = 62
4-7 63 =
5-8 14 =
p170 = 1
foot 35 slope 1.6

I drop 263 to 67 and 4-7 to 67?
0 x
dirk pitt
Econologue expert
Econologue expert
posts: 2081
Registration: 10/01/08, 14:16
Location: isere
x 68




by dirk pitt » 06/03/15, 21:29

Jean-Jacques wrote:Good evening,
so the settings
p263 = 68
p202 = 80
p281 = 62
4-7 63 =
5-8 14 =
p170 = 1
foot 35 slope 1.6

I drop 263 to 67 and 4-7 to 67?

in fact, it takes a small gap between the 2 so I will say 4-7 66 and P263 = 67
0 x
Image

Click my signature
Jean-Jacques
I learn econologic
I learn econologic
posts: 18
Registration: 26/02/15, 19:00




by Jean-Jacques » 06/03/15, 22:25

OK RECEIVED I DO THAT
0 x

 


  • Similar topics
    Replies
    views
    Last message

Back to "Heating, insulation, ventilation, VMC, cooling ..."

Who is online ?

Users browsing this forum : No registered users and 285 guests