Replace the round window of a wood stove

[plasmanu]

the jotul quote has arrived.

"Here are the references I found for your stove (provided they are the right ones ...)

12035363 Door Handle 6.42 €
10023959 Spring 0.48 €
10024217 Door latch 32.22 €
10023621 Low nut 0.18 €
10023518 0.18 €
50027205 glass seal 14.28 €
10024207 Glass 320x280 152.46 €
12016130 16.62 Ash Removal Grid €

That is a total of 222.84 € TTC "

otherwise I order the new 132 background € ttc instead of the 16.62HT ash removal grid.

My grid has suffered


I will regret my good Franco-Belgian 1200 € (it is a boiler and more, you can connect a water circulator behind).
Double burning, loading to put whole beams by the side as there: the carpentry of the house which burns.
But what a greedy conso level, it's good when it's not isolated.
And the jotul is a slaughter conso level but it does not heat so strong and when it is poorly isolated: it does not for a large volume: hence the small sauna, steam room ... to burn chips like Moroccans, sitting on wood like those in the north, and then hot water and steam like Tunisians, a bit like Turkish, I did not cross Roman ... a block of basalt, I had granite is prettier (clear), a seal of water that holds the water too hot , towels, a defibrillator for guests I have acacia blocks to go around with the arms, enough to make 12 chairs and 2 tables.

This is the Christmas gift for a Franco-Belgian friend in photo
The problem is the 2eme mounted, it is 200 or 250 kgs.
Hello the tiling of the stairs, he will curse me.

[Ahmed]

@ Obamot: I do not know what you intend to do with your arc station, but it may be right in terms of power and power factor.
In addition, it is easier to learn to solder with rather large electrodes, like 3,2 ... but if you need advice, as a compulsive welder, you will find me at your disposal in MP. (No, it's not the right eye protection for welding!)

[plasmanu]

more than the post at the bow, the gas and the cash flow.
I have to learn to Zinc for my chimney ride the top
I have plenty of zinc (plates, tubes, gutters), little copper (in plate) it's just tubes
Lead is leaves is tubes
stainless steel, aluminum

who would know how to make a STILLit's for my roses in the yard. I will make extracts of perfumes, lavender, thyme, verbena, plum, mirabelle plum, raisin, marc, guignolet, chestnut, genépi, myrtle ...
I have to put in jams too, and worse and worse ... the Burgundians, the muffins, the stew, tajine ...
My ex who voted SPA refused any animal to eat.
And she never watered anything ...
Tomorrow I go to the market to buy stuff with legs to eat and to transplant directly like that in the garden.


and I put it away: there must be one that cuts.

[plasmanu]

I missed the postman yesterday:
my 3500mm disk for makita
it slightly increases the depth of cut.


it is segmented by cons and for the marble it will not do it.
I have to order the same continuous.