Ökofen pellematic 32kw ​​setting (overheating)

Heating, insulation, ventilation, VMC, cooling ... short thermal comfort. Insulation, wood energy, heat pumps but also electricity, gas or oil, VMC ... Help in choosing and implementation, problem solving, optimization, tips and tricks ...
User avatar
1360
Éconologue good!
Éconologue good!
posts: 447
Registration: 26/07/13, 07:30
Location: Switzerland
x 36

Re: ökofen pellematic 32kw ​​(overheating) adjustment




by 1360 » 16/11/20, 05:01

Hello,

How many apartments are there, and on how many floors are they spread?

The building must be large, given the power of the boiler.
0 x
Trying too hard to get into the mold, it ends up looking like a pie.
Captain
I discovered econologic
I discovered econologic
posts: 7
Registration: 12/11/20, 11:54

Re: ökofen pellematic 32kw ​​(overheating) adjustment




by Captain » 16/11/20, 17:51

kafa wrote:Lower the temperature setpoint to the maximum, you should even react to it.

Hello,

I did the test:

Boiler running, setpoint at 19 ° C, the valve is closed (arrow down), hot water is sent to around 50 ° C
then set at 13 ° c, the boiler stops. the valve is closed (arrow down), the water temperature decreases.
which seems logical because the boiler is off.

So either the test technique is not good, or is there a problem with the regulation? : Shock:
0 x
Captain
I discovered econologic
I discovered econologic
posts: 7
Registration: 12/11/20, 11:54

Re: ökofen pellematic 32kw ​​(overheating) adjustment




by Captain » 16/11/20, 17:53

1360 wrote:Hello,

How many apartments are there, and on how many floors are they spread?

The building must be large, given the power of the boiler.


Hello,

240m2 house on 2 floors.
0 x

 


  • Similar topics
    Replies
    views
    Last message

Back to "Heating, insulation, ventilation, VMC, cooling ..."

Who is online ?

Users browsing this forum : Google Adsense [Bot] and 328 guests