Insert or stove?

Heating, insulation, ventilation, VMC, cooling ... short thermal comfort. Insulation, wood energy, heat pumps but also electricity, gas or oil, VMC ... Help in choosing and implementation, problem solving, optimization, tips and tricks ...
dodo
Éconologue good!
Éconologue good!
posts: 353
Registration: 16/01/10, 22:47




by dodo » 31/01/10, 12:11

in fact the lengths of the rectangle is 10.60 in length by 8.18 in width
0 x
User avatar
Cuicui
Econologue expert
Econologue expert
posts: 3547
Registration: 26/04/05, 10:14
x 6




by Cuicui » 31/01/10, 18:01

dodo wrote: the casing must be another thing.

At Brico-Dépot, flexible stainless steel tubing, diameter 20 cm = € 38 per meter. Length cut on demand, can be transported in a large roll that you can put in a car. I'm happy.
0 x
bernardd
Econologue expert
Econologue expert
posts: 2278
Registration: 12/12/09, 10:10
x 1




by bernardd » 01/02/10, 14:33

Sorry dodo, I did not understand anything :-(

A small diagram of the horizontal and vertical surfaces outwards?

(no need for parts, it's just to see the exchange surfaces ...)
0 x
See you soon !
trpcinema
I discovered econologic
I discovered econologic
posts: 6
Registration: 08/12/11, 02:32

heating by chimney?




by trpcinema » 08/12/11, 12:29

Hello ..
then 1) the open fireplace forgotten, it heats nothing, it burns out when you are in front, and it eats wood galore
2) the insert it lasts no more than 4 max 5 hours .. it already heats better but it's not the best without forced air recuperators
3) the closed hearth yes it is much more expensive .. but it is better and it lasts 8 to 12 hours following printing and loading
4) one of the two with a boiler is perfect .. but it's very expensive .. at least 3000 to 4000 euros just for the device without what goes with it
4 will take a look at http: www.bouilleur.fr
you will find a different choice to add to your installation for around 1000 euros + 300 of circulator, expansion tank, etc. etc.
cordially
0 x

 


  • Similar topics
    Replies
    views
    Last message

Back to "Heating, insulation, ventilation, VMC, cooling ..."

Who is online ?

Users browsing this forum : No registered users and 412 guests