Hello everyone
here I see that you know the b-max burner I would like to mount one but when do you think?
reliability parts etc adjustment where to find it and at what price?
I have a topaz oil boiler, power 25-35 with a water capacity of 21L.
thank you all
Wood pellet burner on fuel oil boiler Buderus S115?
-
- I understand econologic
- posts: 57
- Registration: 03/01/11, 09:03
- Location: isere-Savoie
- x 2
-
- I understand econologic
- posts: 57
- Registration: 03/01/11, 09:03
- Location: isere-Savoie
- x 2
I have the b-home, because I don't need more than 25KW, which is already huge for a house.
be careful, the b-half, only cleans its grid by shaking it if I understand correctly.
that doesn't change the fact that you have to go open the boiler, vacuum or sweep every week.
the oil boiler is not designed to receive ash.
you have to study how your boiler is made and tell you that unlike fuel oil, your smoke is loaded with ash particles that will stick everywhere.
my boiler being very simple, (it is only a tank that one heats, the ashes remains inside, and I only have to vacuum the ashes in the tank and clean the grid at the same time)
it takes about 5-10 minutes a week.
for consumption, approximately 2 times more pellets are provided than fuel oil.
remains to have a well dimensioned set.
how powerful is your oil burner with the nozzle flow)
what is your fuel oil consumption.
are you a minimum handyman?
be careful, the b-half, only cleans its grid by shaking it if I understand correctly.
that doesn't change the fact that you have to go open the boiler, vacuum or sweep every week.
the oil boiler is not designed to receive ash.
you have to study how your boiler is made and tell you that unlike fuel oil, your smoke is loaded with ash particles that will stick everywhere.
my boiler being very simple, (it is only a tank that one heats, the ashes remains inside, and I only have to vacuum the ashes in the tank and clean the grid at the same time)
it takes about 5-10 minutes a week.
for consumption, approximately 2 times more pellets are provided than fuel oil.
remains to have a well dimensioned set.
how powerful is your oil burner with the nozzle flow)
what is your fuel oil consumption.
are you a minimum handyman?
0 x
ok thank you very much
handyman question yes I am with the right advice
at the moment I heat myself with a pellet stove but I still have my boiler for my hot water
i know the burner is a riello 40 i saw 0.115 kw
what annoys me a little is that my boiler is not equipped with a door but a plate with 6 nuts if you want I can send you in PDF the characteristics of my boiler which dates from 1997
so with the b-home I would have more than enough!
please
handyman question yes I am with the right advice
at the moment I heat myself with a pellet stove but I still have my boiler for my hot water
i know the burner is a riello 40 i saw 0.115 kw
what annoys me a little is that my boiler is not equipped with a door but a plate with 6 nuts if you want I can send you in PDF the characteristics of my boiler which dates from 1997
so with the b-home I would have more than enough!
please
0 x
-
- I understand econologic
- posts: 57
- Registration: 03/01/11, 09:03
- Location: isere-Savoie
- x 2
-
- I understand econologic
- posts: 57
- Registration: 03/01/11, 09:03
- Location: isere-Savoie
- x 2
Well yes c any benefit.
on which site do you plan to take it?
I think it takes 2 to 3 weeks.
Did you verify that your boiler is compatible with this kind of burner? Have you taken into account any modifications to your boiler door?
Didn't you indicate the power of the burner?
o.115kw, it must be the electric power.
the heating power of the burner must be written in the instructions for use and also depends on the size of the nozzle.
on which site do you plan to take it?
I think it takes 2 to 3 weeks.
Did you verify that your boiler is compatible with this kind of burner? Have you taken into account any modifications to your boiler door?
Didn't you indicate the power of the burner?
o.115kw, it must be the electric power.
the heating power of the burner must be written in the instructions for use and also depends on the size of the nozzle.
0 x
-
- I understand econologic
- posts: 57
- Registration: 03/01/11, 09:03
- Location: isere-Savoie
- x 2
-
- Similar topics
- Replies
- views
- Last message
-
- 1 Replies
- 658 views
-
Last message by phil59
View the latest post
03/02/24, 22:33A subject posted in the forum : Heating, insulation, ventilation, VMC, cooling ...
-
- 2 Replies
- 1589 views
-
Last message by MARTIN5335
View the latest post
07/01/23, 13:11A subject posted in the forum : Heating, insulation, ventilation, VMC, cooling ...
-
- 0 Replies
- 7931 views
-
Last message by Peace
View the latest post
01/02/20, 18:24A subject posted in the forum : Heating, insulation, ventilation, VMC, cooling ...
-
- 3 Replies
- 9264 views
-
Last message by macky28
View the latest post
21/01/21, 16:03A subject posted in the forum : Heating, insulation, ventilation, VMC, cooling ...
-
- 4 Replies
- 9194 views
-
Last message by Okaido
View the latest post
01/01/18, 19:53A subject posted in the forum : Heating, insulation, ventilation, VMC, cooling ...
Back to "Heating, insulation, ventilation, VMC, cooling ..."
Who is online ?
Users browsing this forum : Majestic-12 [Bot] and 298 guests