Auer Pulsator gas boiler: docs and infos

Heating, insulation, ventilation, VMC, cooling ... short thermal comfort. Insulation, wood energy, heat pumps but also electricity, gas or oil, VMC ... Help in choosing and implementation, problem solving, optimization, tips and tricks ...
User avatar
I Citro
Econologue expert
Econologue expert
posts: 5129
Registration: 08/03/06, 13:26
Location: Bordeaux
x 11




by I Citro » 01/12/09, 08:58

: Arrow: I have announced prices given by installers including VAT (5.5% VAT). We can not find the prices of the material alone on this kind of material whose distribution does not go through the DIY ...

It's a bit normal and it avoids forums full of messages from unhappy users ...
This boiler has some special features that must be observed during installation to be fully satisfied ...

I announced them above. : Arrowu:
0 x
Christophe
Moderator
Moderator
posts: 79125
Registration: 10/02/03, 14:06
Location: Greenhouse planet
x 10974




by Christophe » 01/12/09, 09:34

Well I don't know you could have seen the prices in an Auer catalog for example.

Ok so in this case you are right: it is equivalent to the price of a (good) oil-fired boiler installed.

If you have to dismantle the old one, it's generally a little more expensive (although the heating contractor should pay for the graceful recovery of the equipment ... well).
0 x
david59
I discovered econologic
I discovered econologic
posts: 4
Registration: 30/11/09, 22:31

PULSATORY GAS BOILER




by david59 » 01/12/09, 23:29

quote
1 pulsating gas boiler from the AUER brand 4101.00
power of 20 kw heating only.
1 DHW tank of 130 liters in stainless steel 845.00
1 room corrector 120.00
1 DHW sensor 49.00
1 HP kit 2 hydraulic assembly pre-mounted on plate
equipped with 2 circulators 891.00
2 flexible 26/34 stainless steel
1 liter of scrubber 27.00

14 emptying and dismantling existing boiler ect ....... 48.00

TOTAL VAT 7073.78 euros :P
0 x
User avatar
I Citro
Econologue expert
Econologue expert
posts: 5129
Registration: 08/03/06, 13:26
Location: Bordeaux
x 11




by I Citro » 02/12/09, 00:24

:?: Who are your transmitters david59. :?:
- Radiators. :?: if so, what type. :?:
- Heating floor. :?:
0 x
david59
I discovered econologic
I discovered econologic
posts: 4
Registration: 30/11/09, 22:31




by david59 » 02/12/09, 18:52

HENRAD brand steel radiator, alto plan type.
0 x
User avatar
I Citro
Econologue expert
Econologue expert
posts: 5129
Registration: 08/03/06, 13:26
Location: Bordeaux
x 11




by I Citro » 02/12/09, 22:28

david59 wrote:HENRAD brand steel radiator, alto plan type.
It looks very good to me.
They are not noisy. :?: , no purge issues. :?:

If they are dimensioned correctly, even oversized compared to the needs for your house, your boiler will condense all the better and will therefore be very economical.
0 x
Christophe
Moderator
Moderator
posts: 79125
Registration: 10/02/03, 14:06
Location: Greenhouse planet
x 10974

Re: Pulsator d'Auer gas boiler: docs and info




by Christophe » 26/05/16, 14:55

0 x

 


  • Similar topics
    Replies
    views
    Last message

Back to "Heating, insulation, ventilation, VMC, cooling ..."

Who is online ?

Users browsing this forum : No registered users and 271 guests