Okofen and Pellaqua, insufficient heating problem?

[Neek-O]

Yes, Mr musso had (rightly !!!) told me about 2 possibilities:
- a V3V problem which would have to be replaced because it seems to go bad considering the recordings (it proves that he was right!)
- a regulatory problem, which does not always behave in the same way for a "given situation" when it should ...


Return to start box:
now that it's reclipsed, we redo a week of recordings ...!

[dedeleco]

after the passage of all the "intervention group",

The GIGN Okofen is past !!!!

And it gets hot !!!!!

and it's 26 ° C in the house !!! A furnace !

And let's be positive:

there are brands that have an after-sales service that a) is concerned about their case and b) advance the schmilblic; this is far from the general case!]

And the GIGN will come back to advance the schmilblic!

And the next cold spell they will be too cold as at the beginning !!

It's even better than the real GIGN able to take for real terrorists people walking around with a pressure cooker full of vegetables, stopping them violently !!

For my part, I have an allergy to "the water law", "the heating curve" and other complicated stuff !!!

[manet42]

Oh, cow, what a frenzy, the GIGN now...

Must stop smoking the carpet my dear Dede

Or is it your allergy, by dint of intervening on this post where it is a question of water laws?
You will end up having an additional hives attack.

Jc

[dedeleco]

It is not me who spoke of GI "intervention group !!!


They were really impressive GI Okofen !!

Little risk that I will end up having an additional hives attack !!!

To put in post Humor !!!

See also cold fusion:
https://www.econologie.com/forums/post191063.html#191063

because in Bologna scientists who seem coherent and competent, are going to sell a cold fusion boiler by catalyst helping the transformation of more hydrogenated nickel into copper !!

You will be able to heat yourself like this for 10 times cheaper and study the water law of the Rossi boiler !!!!!

[Neek-O]

I was the one who deliberately turned this as a joke, the "intervention group" as I have to call it was not strictly speaking Okofen, but I am talking about the day when everyone came back home. to "check all the connections" (- but apparently forget to re-clip elements before leaving -), ie the heating engineer, and the "regional delegates" (and not Okofen nationnal).

As I said above, we are back to square one: they (Okofen national) send me a USB key in order to re-proceed to recording, now that the V3V is functional; in order to check the reactions of the regulation in particular. I also told them about the boiler power.


NB: medically speaking,
in case of allergy a complete eviction of allergens is advisable ...

[manet42]

NB: medically speaking,
in the event of allergy a complete eviction of allergens is to be advised

But no, he likes to suffer!

By the way, is it easy to record with a USB key?
I'm tempted.

JC

[Did67]

1) Save the parameters and cycles of the boiler: this must depend on the model. Me, on mine, I don't have a USB port but a Compact Flash port + an old-style VGA connection ...

If I understood correctly, now the turntables have a USB port?

2) Record the temperature: there are inexpensive USB recorders. If it is, is there any in the econology shop? Ah yes, here it is: https://www.econologie.com/shop/enregist ... p-192.html

[manet42]

Thanks, I'm going to look at what's on mine.

jc

[Did67]

Unless I'm mistaken, you're an "old man", you have the CF port, right?

[Neek-O]

Me, on the "white" version, there are 2:
- 1 compact flash port
- just above, hidden / attached UNDER the "smart card", a USB port.

On occasion I will make you a photo.