Submerged pump diagram, start blocking

And if they were repairing rather than throwing and change? Rediscover the pleasure of the repairs yourself. How to diagnose a problem or find spare parts? Repair itself is way to save money generally!
Christophe
Moderator
Moderator
posts: 79121
Registration: 10/02/03, 14:06
Location: Greenhouse planet
x 10973




by Christophe » 25/07/08, 18:09

Try the method with the DC voltmeter I gave above ...
0 x
User avatar
dobropat
I learn econologic
I learn econologic
posts: 10
Registration: 24/07/08, 22:51
Location: La Sauve Majeure> Gironde




by dobropat » 25/07/08, 18:23

Christophe wrote:Try the method with the DC voltmeter I gave above ...


Excuse me, I hadn't read everything!: Cheesy:
That's done !
In the 200 mV continuous position, the tester remains on 0. This would mean that the condo is dead :?:
0 x
Christophe
Moderator
Moderator
posts: 79121
Registration: 10/02/03, 14:06
Location: Greenhouse planet
x 10973




by Christophe » 25/07/08, 19:07

That's it.

So I think he's HS. To be confirmed with another method perhaps?
0 x
schadoc
I discovered econologic
I discovered econologic
posts: 1
Registration: 25/07/08, 21:11




by schadoc » 25/07/08, 21:22

Hello
find a person who can test your condo (an electric motor winder) with a capasimeter it is a permanent condo that you have because 16 mf and more the starting condo do not put more in the pumps these days because too of problem
and measure the 3 wires of your motor they must pass together
with different values
I believe that you have a pump said drilling seen the photo and not rewindable because the stator and generally crimped or welded
good night : Idea:
0 x
User avatar
I Citro
Econologue expert
Econologue expert
posts: 5129
Registration: 08/03/06, 13:26
Location: Bordeaux
x 11




by I Citro » 25/07/08, 23:56

: Arrow: Well i'm a little late, André and Christophe said the principal.

I still retained a good trick of "old Trapper" to test a condo, the connection in series with a bulb of 100W ... excellent : Idea:

Experience is only true. : Mrgreen:
0 x
User avatar
dobropat
I learn econologic
I learn econologic
posts: 10
Registration: 24/07/08, 22:51
Location: La Sauve Majeure> Gironde




by dobropat » 28/07/08, 22:49

I ordered the condo, as soon as I installed it, I will keep you posted ( :!: ).

You had to dare to do it! : Mrgreen:
0 x
User avatar
dobropat
I learn econologic
I learn econologic
posts: 10
Registration: 24/07/08, 22:51
Location: La Sauve Majeure> Gironde

it works !!!




by dobropat » 04/08/08, 17:36

well here, I changed the condo, reassembled the pump, I left it in water for 24 hours to check the tightness and it seems to work!

thank you all for your wise advice

:P
0 x
pp_de_VE
I discovered econologic
I discovered econologic
posts: 2
Registration: 23/04/08, 21:26
Location: Toulouse




by pp_de_VE » 22/02/09, 12:39

Hello,

A documentation is present on this page for the control of the permanent capacitor:

http://www.volta-electricite.info/articles.php?lng=fr&pg=11023

;-)
0 x
Joebarthib
I discovered econologic
I discovered econologic
posts: 1
Registration: 14/07/19, 18:16
Location: Philippines

Re: Submersible pump diagram, blocking at start-up




by Joebarthib » 17/07/19, 15:42

Hello,
I have the same pump that I already renovated qq years ago on the mechanical part and now I have a problem of diff which jumps. The plans are no longer accessible and I don't see how to access the condo ... It seems set for the entire upper part of the pump ... Anyone have any good info for me?
Thank you

Th
0 x

 


  • Similar topics
    Replies
    views
    Last message

Back to "failure, troubleshooting and repair: repair yourself? "

Who is online ?

Users browsing this forum : No registered users and 159 guests