Combined wood baby 1130 the motor blows the weights of my electric meter

And if they were repairing rather than throwing and change? Rediscover the pleasure of the repairs yourself. How to diagnose a problem or find spare parts? Repair itself is way to save money generally!
pascaldubord
I learn econologic
I learn econologic
posts: 20
Registration: 26/03/21, 17:44
x 3

Re: Combined wood baby 1130 the motor blows the weights of my electric meter




by pascaldubord » 28/03/21, 21:43

Thank you that s what I will try to do as soon as possible and as soon as it is done you will keep informed and send a photo.
1 x
pascaldubord
I learn econologic
I learn econologic
posts: 20
Registration: 26/03/21, 17:44
x 3

Re: Combined wood baby 1130 the motor blows the weights of my electric meter




by pascaldubord » 03/04/21, 12:42

Good morning all ..
Action taken:
Remove the 2 large parts on the motor shaft.
Remove fan cover
Motor opening for checking if no other problem (while I'm there)
Removing the tree to see if we can turn it over (there is one side of the tree that protrudes more than the other) and I wanted to put the large side on the right (currently on the left)
Cuts damaged cables at the switch housing
Sleeve them with heat shrink to the coil, heat and reassemble everything with the shaft reversed.
Test 1: it turns but once right side up and once upside down and so on.
Suddenly reassembly and reassembly with the shaft in place.
I'm pretty proud of myself and pretty sure I've solved the problem.
Test 2: starting the engine without the belt which drives one or other of the tools. The engine runs but once right side up and once upside down.
HOWEVER FOLLOWING A LITTLE SURE TO HAVE REPLACED THE CABLES IN THEIR PLACE
Test 3: same as test 2 but with the belt placed on the planer the engine wants to start but does not turn, it must be assisted when starting by pushing the pulley by hand. Once it has started it does not appear to have lost any power.
Thank you again for your help.
Attachments
20210402_155553.jpg
1 x
User avatar
Macro
Econologue expert
Econologue expert
posts: 6459
Registration: 04/12/08, 14:34
x 1610

Re: Combined wood baby 1130 the motor blows the weights of my electric meter




by Macro » 03/04/21, 12:56

change your capacitor ...
0 x
The only thing safe in the future. It is that there may chance that it conforms to our expectations ...
pascaldubord
I learn econologic
I learn econologic
posts: 20
Registration: 26/03/21, 17:44
x 3

Re: Combined wood baby 1130 the motor blows the weights of my electric meter




by pascaldubord » 03/04/21, 13:02

OK, thanks
Is it because of that once upside down once upside down?
Or is it so that it starts without help?
Can I use the machine while I wait?
Is that the capacitor?
What kind of current capacitor would be compatible with this one?
Thank you
Attachments
20210326_162703.jpg
0 x
pascaldubord
I learn econologic
I learn econologic
posts: 20
Registration: 26/03/21, 17:44
x 3

Re: Combined wood baby 1130 the motor blows the weights of my electric meter




by pascaldubord » 03/04/21, 14:12

I confirm :
Once started (in the right direction) the motor does not lose power. I just carried out a test with the jointer.
0 x
User avatar
Obamot
Econologue expert
Econologue expert
posts: 28725
Registration: 22/08/09, 22:38
Location: regio genevesis
x 5538

Re: Combined wood baby 1130 the motor blows the weights of my electric meter




by Obamot » 03/04/21, 14:14

It is better to take the same capacitor, there are tolerances, it is not for nothing ...

For the contacts, Guy had told you to take pictures “before”

I also suggested to go CABLE BY CABLE ... to avoid any mistakes.

Apparently, just by looking at your photos: before / after - without wanting to be categorical because you can't see well - the connections don't seem to be the same: (the question marks = this is where the 'we do not see well enough what was connected in the old connection)

9BE171A0-2980-4277-B687-9A6E5F9B1894.jpeg
0 x
pascaldubord
I learn econologic
I learn econologic
posts: 20
Registration: 26/03/21, 17:44
x 3

Re: Combined wood baby 1130 the motor blows the weights of my electric meter




by pascaldubord » 03/04/21, 14:22

The photos of the front wiring are at the beginning of the shift.
Redoing the wiring one by one was not possible since it was necessary to open the box so I entered the locations in 1 file and put them back in the right place if I didn t make a mistake.
I took a thousand precautions but? The error is human .
Attachments
baby1130.docx
(12.53 KB) Downloaded times 344
0 x
User avatar
Obamot
Econologue expert
Econologue expert
posts: 28725
Registration: 22/08/09, 22:38
Location: regio genevesis
x 5538

Re: Combined wood baby 1130 the motor blows the weights of my electric meter




by Obamot » 03/04/21, 14:40

I said what I saw, hoping it might help, without any certainty.

So much the better if the connections are correct (I can't read doc.x)

But then why does it turn once in one direction and then once in the other if it's “right”?

I say that, I say nothing, it was not reported that this was happening before the emergence of this thread.

Good continuation in any case ... And above all full success!
0 x
pascaldubord
I learn econologic
I learn econologic
posts: 20
Registration: 26/03/21, 17:44
x 3

Re: Combined wood baby 1130 the motor blows the weights of my electric meter




by pascaldubord » 03/04/21, 15:08

I had not seen your photos I will recheck one more time.
In any case whether I solve the problem or not I thank you all for your help
0 x
pascaldubord
I learn econologic
I learn econologic
posts: 20
Registration: 26/03/21, 17:44
x 3

Re: Combined wood baby 1130 the motor blows the weights of my electric meter




by pascaldubord » 03/04/21, 15:22

"before any cable here?"
I have just checked all my photos none at a good enough angle to check it so the doubt is more than allowed.
I will try to look carefully at this wiring diagram
Attachments
20210327_153228.jpg
0 x

Back to "failure, troubleshooting and repair: repair yourself? "

Who is online ?

Users browsing this forum : gegyx and 194 guests