Well if it's at home and he asked for permissions?
400 kg and mechanical shovel, well I see that we are not playing in the same schoolyard, I go back to my sandbox...
Manufacturing a bucket wheel with an irrigation reel
-
- Moderator
- posts: 79332
- Registration: 10/02/03, 14:06
- Location: Greenhouse planet
- x 11046
Well if it's at home and he asked for permissions?
ok no bp if authorization, but it is much more complicated than it seems, deprives or not its water short is public (water fauna and flora does not belong to it), it is not closed water ( although ... it would be necessary that a judge decrees it). the laws of fishing are very complicated ...
the authorizations it is not obtained like that ... it is very long and it is the course of the combatant the different actors are first navigation, the fishing company, the water agency or the drire, the dde etc .. .
it would be a shame to take a fine and be forced to dismantle the work on the simple complaint of a guard, a fisherman or a jealous neighbor (whenever he sees the project on the net)
Anyway, when you have a pond, you are aware of that ... I presume.
before speculating more on anything i will wait for the response from Fredot 24.
0 x
Oh there!!
the tailrace is on the private domain and the structure was already half existing for the dredge I will meet them next week
but as it seems that it heats up and that all these technocrats and civil servants will take a decade to decide and that I am at home operating a fish farming area, the project being already under study for quite some time, grids will be posed at the arrival of the wheel and the shape of the buckets (curves) allow the passage of a trout without killing it the installation is planned on one of my private fishing routes I have a right of water for fish farming
I don't see why at the moment he would forbid me
so I anticipate the movement a little we are not in Copenhagen here it has to move it is understood that there is no resale EDF
in case it gets stuck in the media coverage of the project but I don't think it is necessary
please
frederic
the tailrace is on the private domain and the structure was already half existing for the dredge I will meet them next week
but as it seems that it heats up and that all these technocrats and civil servants will take a decade to decide and that I am at home operating a fish farming area, the project being already under study for quite some time, grids will be posed at the arrival of the wheel and the shape of the buckets (curves) allow the passage of a trout without killing it the installation is planned on one of my private fishing routes I have a right of water for fish farming
I don't see why at the moment he would forbid me
so I anticipate the movement a little we are not in Copenhagen here it has to move it is understood that there is no resale EDF
in case it gets stuck in the media coverage of the project but I don't think it is necessary
please
frederic
0 x
hello Fredo 24
ok you are in a particular case provided by the fishing law (I told you it is complicated)
me neither ... but the project must be well put together and it can take time to obtain authorization (unless you have relations with the pref)
therefore it does not concern navigation nor the fishing company.
on the other hand I think that it is necessary an agreement with the owner of the mill
in any case I wish you good luck for this very interesting project
one last detail: you do not have the right to resell your current, except to edf
good job keep us posted
on one of my private fishing routes I have a water right for fish farming
operating a fish farm
ok you are in a particular case provided by the fishing law (I told you it is complicated)
I don't see why at the moment he would forbid me
me neither ... but the project must be well put together and it can take time to obtain authorization (unless you have relations with the pref)
I am fed by a weir of mill not on stream 1st cat or 2nd
therefore it does not concern navigation nor the fishing company.
on the other hand I think that it is necessary an agreement with the owner of the mill
in any case I wish you good luck for this very interesting project
one last detail: you do not have the right to resell your current, except to edf
good job keep us posted
0 x
the electricity produced is consumed by the farm directly
a photovoltaic installation is currently being quoted
170m2 facing south on 2 gite buildings and built-in agricultural bati
resale edf 27kwh planned
erdtf line 36kw already on site
and inverter on installation already installed
it is expensive but profitable in the medium term
sanyo panels and german inverter
a photovoltaic installation is currently being quoted
170m2 facing south on 2 gite buildings and built-in agricultural bati
resale edf 27kwh planned
erdtf line 36kw already on site
and inverter on installation already installed
it is expensive but profitable in the medium term
sanyo panels and german inverter
0 x
In your photos there is no fall? On this site made by a former EDF engineer there is a lot of information and he gladly responds by email.
http://www.hydroroues.fr/
http://www.hydroroues.fr/
0 x
-
- Similar topics
- Replies
- views
- Last message
-
- 1 Replies
- 11978 views
-
Last message by dedeleco
View the latest post
16/06/11, 16:41A subject posted in the forum : Hydraulic, wind, geothermal, marine energy, biogas ...
-
- 23 Replies
- 97660 views
-
Last message by dedeleco
View the latest post
01/07/11, 17:14A subject posted in the forum : Hydraulic, wind, geothermal, marine energy, biogas ...
-
- 26 Replies
- 25141 views
-
Last message by nialaz
View the latest post
18/05/09, 22:22A subject posted in the forum : Hydraulic, wind, geothermal, marine energy, biogas ...
-
- 53 Replies
- 303206 views
-
Last message by coucou789456
View the latest post
25/03/10, 16:18A subject posted in the forum : Hydraulic, wind, geothermal, marine energy, biogas ...
-
- 9 Replies
- 9260 views
-
Last message by zac
View the latest post
10/11/06, 20:30A subject posted in the forum : Hydraulic, wind, geothermal, marine energy, biogas ...
Back to "hydraulic, wind, geothermal, marine energy, biogas ..."
Who is online ?
Users browsing this forum : No registered users and 226 guests