How to set a Windmaster for 600 black?

[plasmanu]

You have to be wary of incompetent people.
The day before yesterday I learned that:
The detached house of a friend of my daughter (Sonia) was half burned because an installer came to replace the meter where to scrape it, I don't know. 45 minutes minutes for the firefighters to arrive.
Just that the 18-year-old girl is the only one to have woken up with smoke, went to her little brother's room where there were flames.
And that once everyone outside the unconscious father went back into the blaze to get his harley davidson.
I just knew (from the CHU) that "Vogüé: a house completely destroyed by a fire" by regional news on the internet that in a house in Vogüé (Ardèche) there was a fire.
And in the photo it is the bus stop (which I see right now) where I put my daughter and Sonia. What an incredible coincidence. She lives next door.
I will know more when my daughter returns from her day skiing.
https://www.ledauphine.com/faits-divers ... n-incendie

Screenshot_2020-01-18-04-40-57_1.jpg (228.18 KB) Viewed 4286 times

PS: it has nothing to do with the subject, except installer, meter, problems & surely incompetent

[FRANCK (49)]

Hello,

Your findings are very interesting. Thank you for sharing.

Personally I follow you very well in your explanations.

Do not hesitate to share other feedback ...

Can you say more about the installation and especially the site (exhibition, urban or rural environment, height ... Etc)

If you do not wish to disclose all of this publicly, you can also respond privately (I'm interested ...)

Once again, thank you for this message full of practical information (and not just theoretical ...).

Hello, I'm starting to post on my wind adventure:
energies-renewable / my-small-wind turbine-hye600-t16274.html

[FRANCK (49)]

You have to be wary of incompetent people.
The day before yesterday I learned that:
The detached house of a friend of my daughter (Sonia) was half burned because an installer came to replace the meter where to scrape it, I don't know. 45 minutes minutes for the firefighters to arrive.
Just that the 18-year-old girl is the only one to have woken up with smoke, went to her little brother's room where there were flames.
And that once everyone outside the unconscious father went back into the blaze to get his harley davidson.
I just knew (from the CHU) that "Vogüé: a house completely destroyed by a fire" by regional news on the internet that in a house in Vogüé (Ardèche) there was a fire.
And in the photo it is the bus stop (which I see right now) where I put my daughter and Sonia. What an incredible coincidence. She lives next door.
I will know more when my daughter returns from her day skiing.
https://www.ledauphine.com/faits-divers ... n-incendie
Screenshot_2020-01-18-04-40-57_1.jpg

PS: it has nothing to do with the subject, except installer, meter, problems & surely incompetent

yes it sucks.

[Revox]

Good evening everyone,
I bought a house with a wind turbine 2 years ago, but looking at it in the parameters over 1 year it produced 3kw which seems weak to me!
I would like your help to clarify my settings.
Wind turbine is a 1000w 24v DC FuturEnergy, mounted on a mast in the field.
There are 2 MasterVolt 600 in parallel which injects into the 220v network of the house, with safety in the event of a power cut UFE ENS26.
See attachments.
Thank you in advance for your assistance.
Pascal

[Obamot]

Bah, I'll say the obvious, wind turbines are completely dependent on the wind, if there was little wind, the result is little production.

There may also be something to do with the auto orientation of the wind turbine depending on the wind. How is the drift?
Photos from the site would help.

[Revox]

Bah, I'll say the obvious, wind turbines are completely dependent on the wind, if there was little wind, the result is little production.

There may also be something to do with the auto orientation of the wind turbine depending on the wind. How is the drift?
Photos from the site would help.

At your request, here is the outdoor installation....
I have made a correction, the production is 3 kw for 2 years.

Do not pay attention to the deformation of the photo, the mast is vertical....

[Obamot]

Goods.

Yes, well, the length of the blades is not huge either.
Maybe complete with solar panels on the roof? (If there is none).
Since the hard part is already done since the interconnection with the network is already there.

[Revox]

Goods.

Yes, well, the length of the blades is not huge either.
Maybe complete with solar panels on the roof? (If there is none).
Since the hard part is already done since the interconnection with the network is already there.

Yes it's not a bad idea, I was just thinking of evolving in the future with panels and batteries...

But above all, I want to solve this wind turbine problem, knowing this is not due to the settings.
For fins, it is a diameter of 1m80.

[izentrop]

I have made a correction, the production is 3 kw for 2 years.

This is power data, the energy is indicated in KWh.
What is the power delivered when the wind is medium to strong?

With 20% wind per year and 500 W of power delivered to the meter, production should be 365 * 24 * 0.5 * 0.2 = 876 KWh/year.
There is indeed a discomfort.

Are you in a windy region and not in a valley bottom (already seen )?

[sicetaitsimple]

I'm not a specialist, but your inverters seem to require a minimum input voltage of 45V DC (between 45 and 125V), which your wind turbine does not seem to be able to provide, which seems designed to work on 24V batteries according to its file technical.
http://www.aurore-energies.com/onduleur ... eseau.html

Did it work one day, that wind turbine, I mean before you bought the house?