polycombustible steam boiler

Renewable energies except solar electric or thermal (seeforums dedicated below): wind turbines, energy from the sea, hydraulic and hydroelectricity, biomass, biogas, deep geothermal energy ...
the boulle
I posted 500 messages!
I posted 500 messages!
posts: 519
Registration: 02/12/08, 20:44
x 12




by the boulle » 14/07/14, 13:34

Image

Image

Image

burner

Image

boiler
0 x
the boulle
I posted 500 messages!
I posted 500 messages!
posts: 519
Registration: 02/12/08, 20:44
x 12




by the boulle » 14/07/14, 14:25

0 x
the boulle
I posted 500 messages!
I posted 500 messages!
posts: 519
Registration: 02/12/08, 20:44
x 12




by the boulle » 20/09/14, 16:04

Hello

Tofs from the new boiler
Image
1
Image
2
the final exchanger
3
Image

Overview

Image
4
the pots shown on the previous model

Image
5
the microphone of the surveillance cell (sound)

Image
6
assembled overview

Image
7
oil them under the pot

Image
8

the air supply, the biggest pipe

___________________________________________

this boiler is more efficient, much more airtight, the final exchanger recovers the last calories from the outlet gases, the t ° c of the fumes are equal to the temperature of return of water to the boiler.
0 x
yannouk
I learn econologic
I learn econologic
posts: 29
Registration: 16/10/13, 22:30




by yannouk » 29/10/14, 17:02

it tinkers severe around here, it leaves me dreamy, bravo.
For my part, I will be satisfied with a simple small oil stove in a gas bottle, following your advice on the other post, laboulle.
I will keep you posted on the result.
0 x
paodooo
I discovered econologic
I discovered econologic
posts: 1
Registration: 05/11/14, 04:01




by paodooo » 05/11/14, 04:17

c'est super

so how are the results?
0 x
danielj
I understand econologic
I understand econologic
posts: 93
Registration: 17/10/12, 18:18

poly combustible spray pot




by danielj » 20/12/14, 18:58

Hello friends, I am resurfacing here because I am finalizing a TBT hot water boiler for my underfloor heating. I did a lot of testing with various pots of growing size! I recovered a copper exchanger from a THEMIS 223 boiler with scrap metal (23 kw gas). I will share my power measurements with you very soon. Measurement of water flow, delta T, weight of fuel consumed, etc ... and of course photos and plans ...
a+
0 x
yannouk
I learn econologic
I learn econologic
posts: 29
Registration: 16/10/13, 22:30




by yannouk » 20/12/14, 23:25

I take advantage that danielj sent this post up to respond to paodooo, regarding feedback.
I posted a photo of the stove on another post, but it's true that I was not very locative. here is the post in question: https://www.econologie.com/forums/poele-a-hu ... 44-20.html
So it works really well. With a consumption of 1L / H to 1,5L / H, it really depots, by current temperatures I heat my 100m² just with that, without worries.

What's great is that I use a little rotten recovery oil, the one I don't use in my car because it freezes in the tank (palm oil). It always hurts my heart to throw it away, and thanks to the oil stove I have almost no fat waste, everything goes .... And without filtration please. I recommend this system.
0 x
danielj
I understand econologic
I understand econologic
posts: 93
Registration: 17/10/12, 18:18

poly combustible spray pot




by danielj » 21/12/14, 15:07

Hello, the advantage of the air injection system is that the combustion is perfect and without odors or pollution, with an almost perfect performance ... My system is improved thanks to a trick that allows automatic starting and stopping! And it burns anything! see you soon for the images, I need time to do them ...
0 x
yannouk
I learn econologic
I learn econologic
posts: 29
Registration: 16/10/13, 22:30




by yannouk » 21/12/14, 16:29

Hi danielj, you intrigue me, especially your story of automation.
I look forward to the photos (and explanations)!
0 x
sdf5dfs5
I discovered econologic
I discovered econologic
posts: 6
Registration: 24/12/14, 04:47




by sdf5dfs5 » 24/12/14, 05:00

More pics. : Mrgreen: : Mrgreen:
0 x

 


  • Similar topics
    Replies
    views
    Last message

Back to "hydraulic, wind, geothermal, marine energy, biogas ..."

Who is online ?

Users browsing this forum : No registered users and 302 guests