Good evening
for the strong in calculus
which torque is obtained by an F of 35 daN at the end of a lever arm of 10 Cm
what power do we get at 10 rpm
please
@+
orbs [img] https://www.econologie.info/smileys/Merci.gif [/ img
Circular hydraulic cylinder
orbs wrote:Good evening
for the strong in calculus
which torque is obtained by an F of 35 daN at the end of a lever arm of 10 Cm
what power do we get at 10 rpm
please
@+
orbs
It is not a couple, but a moment M (I nitpick) ...
M = 350 x 0.1 = 35 Nm
Omega = 10 x 2Pi / 60 = 1,05 rad / s
Power = M Omega = 36,65 W
0 x
Hello
please, who knows:
what tolerance can we admit between a fixed plane (flange) and a mobile plane (rotor) to obtain a surface seal with a pressurized water circulation on the circumference of the rotor, it being admitted that the peripheral seal is ensured by a mobile segment or pallet (see pallet motor)
please
@+
orbs
please, who knows:
what tolerance can we admit between a fixed plane (flange) and a mobile plane (rotor) to obtain a surface seal with a pressurized water circulation on the circumference of the rotor, it being admitted that the peripheral seal is ensured by a mobile segment or pallet (see pallet motor)
please
@+
orbs
0 x
-
- Econologue expert
- posts: 1596
- Registration: 06/08/07, 19:21
- Location: artist land
https://www.econologie.com/forums/buche-de-c ... t7190.html
a hydraulic cylinder?
cellulose logs?
i love puzzles
a hydraulic cylinder?
cellulose logs?
i love puzzles
0 x
Back to "hydraulic, wind, geothermal, marine energy, biogas ..."
Who is online ?
Users browsing this forum : No registered users and 292 guests