Build a voltage regulator for a wind turbine

Renewable energies except solar electric or thermal (seeforums dedicated below): wind turbines, energy from the sea, hydraulic and hydroelectricity, biomass, biogas, deep geothermal energy ...
User avatar
Philippe Schutt
Econologue expert
Econologue expert
posts: 1611
Registration: 25/12/05, 18:03
Location: Alsace
x 33




by Philippe Schutt » 03/03/09, 16:25

Should see what it accepts as input ...
0 x
titiyador
I understand econologic
I understand econologic
posts: 119
Registration: 26/01/09, 21:03
x 2




by titiyador » 03/03/09, 22:38

Hi Philip,

That is to say? Does it accept 10A maximum and 12 or 24V as input?
0 x
He who sows the wind harvest ... happiness !!
User avatar
Philippe Schutt
Econologue expert
Econologue expert
posts: 1611
Registration: 25/12/05, 18:03
Location: Alsace
x 33




by Philippe Schutt » 03/03/09, 23:00

no, in my opinion this is the exit.
0 x
titiyador
I understand econologic
I understand econologic
posts: 119
Registration: 26/01/09, 21:03
x 2




by titiyador » 04/03/09, 09:47

Ok, I'll find out then. I'll keep you posted. Thank you.
0 x
He who sows the wind harvest ... happiness !!
User avatar
chatelot16
Econologue expert
Econologue expert
posts: 6960
Registration: 11/11/07, 17:33
Location: Angouleme
x 264

Re: Build a voltage regulator for a wind turbine




by chatelot16 » 11/02/18, 12:59

gogol's hasar we showed this picture

big error to correct: putting several bipolar transistors in parallel does not work!

the behavior in temperature makes that it is that which is warmer which takes more current, thus heats still more and grill while taking more current than it can

to share current between several bipolar transistor you have to put a resistor in series with each emitter ... it makes a loss of power and more but it is necessary for it to work

finally today we also have the mos fet transistors which have a behavior in temperature allowing to put them in parallel without problem

and there is especially the principle of power supply with cutting which makes completely obsolete the linear regulation ... except particular need like the absence of noise in high fidelity audio material
0 x
izentrop
Econologue expert
Econologue expert
posts: 13644
Registration: 17/03/14, 23:42
Location: picardie
x 1502
Contact :

Re: Build a voltage regulator for a wind turbine




by izentrop » 11/02/18, 23:48

9 years have passed, he must have found the solution since : Wink:
0 x
User avatar
chatelot16
Econologue expert
Econologue expert
posts: 6960
Registration: 11/11/07, 17:33
Location: Angouleme
x 264

Re: Build a voltage regulator for a wind turbine




by chatelot16 » 12/02/18, 00:04

I know that my answer will not be useful to the one who asked the question 10 years ago ... but just not to leave a false thing visible to anyone
1 x

 


  • Similar topics
    Replies
    views
    Last message

Back to "hydraulic, wind, geothermal, marine energy, biogas ..."

Who is online ?

Users browsing this forum : No registered users and 217 guests