Uhhhhhhhhhhhhh!
For information, there is a new version of eLink in V2 on http://www.efergy.com/ or the direct link in DLD http://www.deslocalizachina.com/efergy/ ... indows.rar
It requires the installation of Adobe AIR and works, a priori, very well for me. I say "a priori" because I have been testing it for a few hours and I have nothing to say for the moment (except that the software is not in French).
Here is ...
@+
Software ECOWATT 850 elink: update firmware?
- Persuaders
- I learn econologic
- posts: 26
- Registration: 28/06/10, 23:00
-
- Moderator
- posts: 79121
- Registration: 10/02/03, 14:06
- Location: Greenhouse planet
- x 10973
Thanks for the info, I'm testing ASAP!
Mirror: https://www.econologie.com/fichiers/partager3/eLink_2.zip
Mirror: https://www.econologie.com/fichiers/partager3/eLink_2.zip
Last edited by Christophe the 30 / 07 / 11, 22: 50, 1 edited once.
0 x
Do a image search or an text search - Netiquette of forum
IMPROVEMENT :
- No bug found yet
- Reactive interface
- Clearer interface
- Ability to manage off-peak hours, full hours on several beaches!
- Possibility to manage several rates for the same periods and to compare them
- Possibility of choosing that currency
I JUST LOVE IT
The report of consumptions for a given period in PDF and Excel format in addition to the possibility of sending by MAIL !!!
SMALL DEFECT:
- Interface in English
- Interface color a bit sad
For the moment that happiness strongly conversion in French ...
- No bug found yet
- Reactive interface
- Clearer interface
- Ability to manage off-peak hours, full hours on several beaches!
- Possibility to manage several rates for the same periods and to compare them
- Possibility of choosing that currency
I JUST LOVE IT
The report of consumptions for a given period in PDF and Excel format in addition to the possibility of sending by MAIL !!!
SMALL DEFECT:
- Interface in English
- Interface color a bit sad
For the moment that happiness strongly conversion in French ...
0 x
- Persuaders
- I learn econologic
- posts: 26
- Registration: 28/06/10, 23:00
I will say even more, disappearance of the display per week and therefore suppression of the beug (lol).
On the other hand, if there is an advanced on the number of tariffs (HC and HP), one can only settle the hours and not the minutes (with me it starts ç 20h30).
So far, the only problem I have encountered is the import of my data from the old soft !!! Impossible !!!
@+
On the other hand, if there is an advanced on the number of tariffs (HC and HP), one can only settle the hours and not the minutes (with me it starts ç 20h30).
So far, the only problem I have encountered is the import of my data from the old soft !!! Impossible !!!
@+
0 x
The ecology is the case of all ...
EcoWatt 850
Energy Logger 4000
Energy Monitor 3000
Energy Check 3000
EcoWatt 850
Energy Logger 4000
Energy Monitor 3000
Energy Check 3000
My return on this tool:
It's nice to see that this tool is alive ... it's evolving. This v2 is a real advance in terms of functionalities: management, reporting, comparison with a "budget", PDF and XLS export.
On the other hand, the software becomes more "closed". The backups are made in a ".DB" file which is not readable => We no longer have access to the "raw" data of the ecoWatt. Only the Excel export provides information but the consumption information is given on the day and not hour by hour. Very damaging for me. I therefore keep the old eLink version in order to use the data from the ecowatt (export of the backup in a .CSV / Excel format, hour by hour).
Waiting for the v3 ...; o)
It's nice to see that this tool is alive ... it's evolving. This v2 is a real advance in terms of functionalities: management, reporting, comparison with a "budget", PDF and XLS export.
On the other hand, the software becomes more "closed". The backups are made in a ".DB" file which is not readable => We no longer have access to the "raw" data of the ecoWatt. Only the Excel export provides information but the consumption information is given on the day and not hour by hour. Very damaging for me. I therefore keep the old eLink version in order to use the data from the ecowatt (export of the backup in a .CSV / Excel format, hour by hour).
Waiting for the v3 ...; o)
0 x
- PassionNature78
- I discovered econologic
- posts: 4
- Registration: 14/01/11, 18:39
- Location: Rambouillet (78)
Hello,
After installation this software works fine, but if I restart it it becomes impossible to collect data from the "850" I always have this message "No connection to the server, please re-run the program"
I restart it as an administrator but I still have this problem of connection to the server. (which server?)
If I uninstall and reinstall it works once then I still have the message ..
Do you have this problem
After installation this software works fine, but if I restart it it becomes impossible to collect data from the "850" I always have this message "No connection to the server, please re-run the program"
I restart it as an administrator but I still have this problem of connection to the server. (which server?)
If I uninstall and reinstall it works once then I still have the message ..
Do you have this problem
0 x
My blogs:
Nature => http://passionnature78.canalblog.com/
Photos => http://passionphotos78.canalblog.com/
FZ100 => http://previewofmyfz100.canalblog.com/
Nature => http://passionnature78.canalblog.com/
Photos => http://passionphotos78.canalblog.com/
FZ100 => http://previewofmyfz100.canalblog.com/
Hello everybody
I just registered on this forum following the purchase of an Ecowatt 850
I tested the updates of elink V1 and V2, but the data output in db ???.
Why not be offered different output formats (csv, xls, dbf, txt ...?
A choice of saved measurement intervals would not have been a luxury, since everyone could adapt it to their needs.
In short, the device is a very concrete need, a pity that the app is not up to the expectations of users ... like the Hotline for that matter.
I just registered on this forum following the purchase of an Ecowatt 850
I tested the updates of elink V1 and V2, but the data output in db ???.
Why not be offered different output formats (csv, xls, dbf, txt ...?
A choice of saved measurement intervals would not have been a luxury, since everyone could adapt it to their needs.
In short, the device is a very concrete need, a pity that the app is not up to the expectations of users ... like the Hotline for that matter.
0 x
Hello
I have a problem with the setting ...
already the cd with the device does not work (common problem) ... pff
second, the time slot hc and hp do not stick with me because I'm only 1 line and I need 2.
hc = 1he line 02: 00-07: 00
2th Line 14: 00-17: 00
I am in October firmware 2010 1.10.
Do you have the latest French update please?
THANK YOU.
I have a problem with the setting ...
already the cd with the device does not work (common problem) ... pff
second, the time slot hc and hp do not stick with me because I'm only 1 line and I need 2.
hc = 1he line 02: 00-07: 00
2th Line 14: 00-17: 00
I am in October firmware 2010 1.10.
Do you have the latest French update please?
THANK YOU.
0 x
-
- Similar topics
- Replies
- views
- Last message
-
- 11 Replies
- 8438 views
-
Last message by coucou789456
View the latest post
28/09/09, 03:21A subject posted in the forum : Electricity, electronics and IT Hi-Tech, Internet, DIY, lighting, materials and new
-
- 10 Replies
- 32705 views
-
Last message by Lietseu
View the latest post
08/06/09, 18:46A subject posted in the forum : Electricity, electronics and IT Hi-Tech, Internet, DIY, lighting, materials and new
-
- 5 Replies
- 9882 views
-
Last message by oneed
View the latest post
17/12/10, 18:29A subject posted in the forum : Electricity, electronics and IT Hi-Tech, Internet, DIY, lighting, materials and new
-
- 4 Replies
- 44614 views
-
Last message by innuend0
View the latest post
28/07/09, 11:23A subject posted in the forum : Electricity, electronics and IT Hi-Tech, Internet, DIY, lighting, materials and new
-
- 42 Replies
- 21391 views
-
Last message by dedeleco
View the latest post
18/03/12, 12:46A subject posted in the forum : Electricity, electronics and IT Hi-Tech, Internet, DIY, lighting, materials and new
Who is online ?
Users browsing this forum : No registered users and 138 guests