Departure 70 ° C and return to 40-45 ° C.
I have cast iron radiators.

With my system, from 30 ° C it condenses

Hello, yes the condenser is at the outlet of the boiler, it is a copper exchanger from a gas boiler standby. The wooden box inside there is a radiator to evacuate the heat from the condenser via the blower of my double flow vmc. I did not connect the condenser to the water return of ...

Slt tlm, after 1 year of using my boiler I have just made some changes. Switching to a continuous current fan for better regulation: bad idea !! Impossible to regulate a perfect combustion, I do not know all the subtleties of the burners but I have the impression that it is necessary ...

Slt, 1st cleaning after 800kgs of granulate Slight deformation of the nozzle, so I will replace it with a stainless steel tube this summer. https://www.econologie.com/fichiers/partager3/1398949384HD5F2H.JPG https://www.econologie.com/fichiers/partager3/1398949411yZuyf3.JPG https: //www.econologie.com/fichie ...

That's it the boiler is finished and reliable to date, starts without addiction and it regulates perfectly well. I got a small compressor and a pneumatic brake tank for the trucks, so I no longer need my big compressor. I increased the section of the pipes, so I went from ...

Slt tlm, I dig up the subject slightly but I am also going to make myself a water collection system to supply my house. On the other hand, I have a source in my crawl space. For your odor / bacteria problems there is a simple, fast and ecological solution: o3 or ozone. It destroys all, the ...

Good holes in front of the resistance are not enough, so I will add a compressed air hose to be on cleaning.
Otherwise it works impeccable

Slt tlm, I'm back to give you an update on my electricity consumption. In 5 months I consumed 440kw / h, while with an electric balloon my consumption was ~ 1000kw / h. So I saved ~ 50% energy, I get back on my feet knowing that I have an average COP of 1.5. Normally I would have to pay ...

Hey, how are you going to do the ignition? I had a problem today when starting, as I am modulating the ashes are less hot and they form a bundle just in front of the resistance. So I drilled holes just after the resistance, I'll see if that solves my problem, sino ...

You can not

Photos Photos Photos !!!!