I am looking for info on the magnets that can be tinkered with the arrival of diesel before the injection pump. in trade it's worth a hundred euros but I saw that you could tinker it yourself.
what type of magnet can we use? dishes, flyers?
unipolar magnets (only one polarity per face-medical field) are they "a priori" more effective than multipolar (pls polarities per face).
Finally, if I use flat (or circular) magnets, what polarity do I put in contact with the hose? north or south?
who has experience in this area?
I specify that it is for my traffic renault diesel, therefore not a recent diesel (therefore no problem).
and last question while I'm at it: what type of magnet can we recover? for this type of DIY ...
thank you for the advice of the most informed, informed ...
Om
Yv
Economiser: magnet on diesel hose
-
- Moderator
- posts: 79328
- Registration: 10/02/03, 14:06
- Location: Greenhouse planet
- x 11046
The subject has already been treated and reprocessed.
https://www.econologie.com/forums/liste-inte ... t1446.html
https://www.econologie.com/forums/economiseu ... t1296.html
You can use the search engine to refine:
Link
https://www.econologie.com/forums/liste-inte ... t1446.html
https://www.econologie.com/forums/economiseu ... t1296.html
You can use the search engine to refine:
Link
0 x
Do a image search or an text search - Netiquette of forum
thank you chistophe.
but in your two links I have not seen who is causing the magnets on the fuel inlet hose. on the research made, not found either (can not be gifted the guy?). and to my discharge as said in the subject "with", I have limited time in connection ...
short, short we put neodymium magnets, OK. but how ? circular or flat? and north or south side on the hose? and magnets caught in a hard drive: how is that? computer hard drive? I open and find one or more magnets inside that I use? thank you to those who know.
details: in those who manufacture this type of product, it is mentioned from 10 to 25% of fuel saving ....
Om
Yv
but in your two links I have not seen who is causing the magnets on the fuel inlet hose. on the research made, not found either (can not be gifted the guy?). and to my discharge as said in the subject "with", I have limited time in connection ...
short, short we put neodymium magnets, OK. but how ? circular or flat? and north or south side on the hose? and magnets caught in a hard drive: how is that? computer hard drive? I open and find one or more magnets inside that I use? thank you to those who know.
details: in those who manufacture this type of product, it is mentioned from 10 to 25% of fuel saving ....
Om
Yv
0 x
We are all brothers. Some more than others ....
well it's a bit the same ....
there are 11 pages with a bit of everything and personal converses.
not easy to find your cat there if you do not have much time ...
as for the first of page 1 mentioned by christophe it does not work or more.
I saw a photo of your mounting delnoram, apparently it would be two half round magnets connected together. which polarity is brought into contact with the hose?
you put 4 half circumference, 2 by 2, a few centimeters apart? that's it ?
couldn't we sum up the whole system rather than struggling from post to post (12 pages or more) to find it difficult?
Om
Yv
there are 11 pages with a bit of everything and personal converses.
not easy to find your cat there if you do not have much time ...
as for the first of page 1 mentioned by christophe it does not work or more.
I saw a photo of your mounting delnoram, apparently it would be two half round magnets connected together. which polarity is brought into contact with the hose?
you put 4 half circumference, 2 by 2, a few centimeters apart? that's it ?
couldn't we sum up the whole system rather than struggling from post to post (12 pages or more) to find it difficult?
Om
Yv
0 x
We are all brothers. Some more than others ....
Hello
The basic principle is two nepdymium magnets on each side of the hose, they are in attraction north facing south and the liquid passes through this field.
There are several varaintes will look on the forum PMC Evolution
There are lots of photos and explanations, there is ROLLUS which has results with the explanations.
It is better to galler on the forum than rammer on montages that work more or less.
There is even simpler you buy a completely made max fuel Petro fuel
there are many brands. The results are random according to the data of those who have tried.
If you are looking for the economy it is the oil market that gives the best results.
it's like heating with wood, you have to give yourself the trouble of cutting it, for the oil you have to collect it, filter it, store it, get dirty.
And after .. you don't have enough time to roll to burn it ..
it’s fine to ride for free, but still sitting in the tank it becomes flat ...
Andre
The basic principle is two nepdymium magnets on each side of the hose, they are in attraction north facing south and the liquid passes through this field.
There are several varaintes will look on the forum PMC Evolution
There are lots of photos and explanations, there is ROLLUS which has results with the explanations.
It is better to galler on the forum than rammer on montages that work more or less.
There is even simpler you buy a completely made max fuel Petro fuel
there are many brands. The results are random according to the data of those who have tried.
If you are looking for the economy it is the oil market that gives the best results.
it's like heating with wood, you have to give yourself the trouble of cutting it, for the oil you have to collect it, filter it, store it, get dirty.
And after .. you don't have enough time to roll to burn it ..
it’s fine to ride for free, but still sitting in the tank it becomes flat ...
Andre
0 x
YVV wrote:well it's a bit the same ....
there are 11 pages with a bit of everything and personal converses.
not easy to find your cat there if you do not have much time ...
as for the first of page 1 mentioned by christophe it does not work or more.
I saw a photo of your mounting delnoram, apparently it would be two half round magnets connected together. which polarity is brought into contact with the hose?
you put 4 half circumference, 2 by 2, a few centimeters apart? that's it ?
couldn't we sum up the whole system rather than struggling from post to post (12 pages or more) to find it difficult?
Om
Yv
No it's not quite that, it's inspired by
[quote = http: //www.petrolbooster.com/] link [/ quote]
By cons the result for the moment is either weak or zero, I do not yet have enough perspective (of Km) to give a note to this assembly.
0 x
"Thinking should not it be taught in school rather than to make learning by heart the facts that are not all proven?"
"It's not because they are likely to be wrong they are right!" (Coluche)
"It's not because they are likely to be wrong they are right!" (Coluche)
do not walk there www.petrolbooster.com. I arrive on a page controlled and blocked by websense
Om
Yv
Om
Yv
0 x
We are all brothers. Some more than others ....
-
- Similar topics
- Replies
- views
- Last message
-
- 12 Replies
- 16350 views
-
Last message by Macro
View the latest post
29/11/13, 20:21A subject posted in the forum : special motors, patents, fuel consumption reduction
-
- 7 Replies
- 11037 views
-
Last message by Flytox
View the latest post
06/06/12, 19:12A subject posted in the forum : special motors, patents, fuel consumption reduction
-
- 21 Replies
- 14657 views
-
Last message by hyst
View the latest post
26/05/11, 19:38A subject posted in the forum : special motors, patents, fuel consumption reduction
-
- 1 Replies
- 3629 views
-
Last message by Christophe
View the latest post
06/11/08, 07:57A subject posted in the forum : special motors, patents, fuel consumption reduction
-
- 1 Replies
- 4430 views
-
Last message by Christophe
View the latest post
10/06/08, 19:16A subject posted in the forum : special motors, patents, fuel consumption reduction
Back to "Special motors, patents, fuel consumption reduction"
Who is online ?
Users browsing this forum : No registered users and 293 guests