A fuel-saving vortex turbulator: WITH

Tips, advice and tips to lower your consumption, processes or inventions as unconventional engines: the Stirling engine, for example. Patents improving combustion: water injection plasma treatment, ionization of the fuel or oxidizer.
User avatar
nikolaj
I understand econologic
I understand econologic
posts: 173
Registration: 17/08/17, 18:38
Location: 35120 picking ring
x 14

Re: A fuel-saving vortex turbulator: WITH




by nikolaj » 15/04/21, 09:23

IDEAL PLACES OF AIR CYCLONES, or vortex, or WITH
Fuel savers and depollution
uot8S acvpriofl, srfe t0n9sSS: o4ueree2do ·
IDEAL PLACES OF AIR CYCLONES, or vortex, or WITH throughout the air circuits of the engines up to the exhaust ... Lucio, for example, has just installed 2 cyclones in the exhaust manifold, after the catalyst, therefore before and after the FAP, and ... and he notices an additional powerful thrust, (like the Archimedes thrust; but horizontally, or on an uphill slope ...) (which he did not know before installing these 2 cyclones ...) in the hills on his Mercedes car ... a terminating cyclone can be produced on the exhaust outlet tube when he comes to the associative workshop ... and there ... it will grow again ...
https://www.facebook.com/palahniuk.nikolaj
0 x
A mystery only perpetuates when there is refusal to study it (Georges Charpak?)
User avatar
nikolaj
I understand econologic
I understand econologic
posts: 173
Registration: 17/08/17, 18:38
Location: 35120 picking ring
x 14

Re: A fuel-saving vortex turbulator: WITH




by nikolaj » 15/04/21, 09:25

nikolaj wrote:IDEAL PLACES OF AIR CYCLONES, or vortex, or WITH
Fuel savers and depollution
uot8S acvpriofl, srfe t0n9sSS: o4ueree2do ·
IDEAL PLACES OF AIR CYCLONES, or vortex, or WITH throughout the air circuits of the engines up to the exhaust ... Lucio, for example, has just installed 2 cyclones in the exhaust manifold, after the catalyst, therefore before and after the FAP, and ... and he notices an additional powerful thrust, (like the Archimedes thrust; but horizontally, or on an uphill slope ...) (which he did not know before installing these 2 cyclones ...) in the hills on his Mercedes car ... a terminating cyclone can be produced on the exhaust outlet tube when he comes to the associative workshop ... and there ... it will grow again ...
https://www.facebook.com/palahniuk.nikolaj
Attachments
IDEAL PLACE FOR AIR CYCLONES 2021.PNG
PLACE IDEALE DES CYCLONES AIR 2021.PNG (393.6 KiB) Viewed 3445 times
0 x
A mystery only perpetuates when there is refusal to study it (Georges Charpak?)
User avatar
nikolaj
I understand econologic
I understand econologic
posts: 173
Registration: 17/08/17, 18:38
Location: 35120 picking ring
x 14

Re: A fuel-saving vortex turbulator: WITH




by nikolaj » 15/04/21, 09:33

continuation of the 4 videos 2021 of Arnaud Yzorche for the installations of economical ecological aerodynamic air cyclones ...
0 x
A mystery only perpetuates when there is refusal to study it (Georges Charpak?)
User avatar
nikolaj
I understand econologic
I understand econologic
posts: 173
Registration: 17/08/17, 18:38
Location: 35120 picking ring
x 14

Re: A fuel-saving vortex turbulator: WITH




by nikolaj » 15/04/21, 09:40

suites ...

0 x
A mystery only perpetuates when there is refusal to study it (Georges Charpak?)
User avatar
nikolaj
I understand econologic
I understand econologic
posts: 173
Registration: 17/08/17, 18:38
Location: 35120 picking ring
x 14

Re: A fuel-saving vortex turbulator: WITH




by nikolaj » 15/04/21, 09:42

tele / installation preparations of aerodynamic air cyclones, economical ecological ... the kit is an H2O kit, that is to say that water molecules are sucked in by the engine, to generate a supply of oxidants to improve the combustion of fuels, especially in the mountains, where the air is less loaded with oxygen and hydrogen, therefore simplified and very efficient systems, because as soon as the water molecules enter the combustion chambers, the heat of the engine compresses the air / water / fuel mixtures and produces a remarkable homogeneity, then the motor runs like clockwork ...


0 x
A mystery only perpetuates when there is refusal to study it (Georges Charpak?)
User avatar
nikolaj
I understand econologic
I understand econologic
posts: 173
Registration: 17/08/17, 18:38
Location: 35120 picking ring
x 14

Re: A fuel-saving vortex turbulator: WITH




by nikolaj » 15/04/21, 09:47

Arnaud Yzorche: à Fuel savers and depollution
April 10th
Hello everyone, I made a little video for you to announce the very conclusive result of the H20 kit over 450kms with my range rover p38.
Good weekend to all

0 x
A mystery only perpetuates when there is refusal to study it (Georges Charpak?)
User avatar
gildas
Grand Econologue
Grand Econologue
posts: 879
Registration: 05/03/10, 23:59
x 173

Re: A fuel-saving vortex turbulator: WITH




by gildas » 15/04/21, 12:18

Hello, thank you for these testimonials.
Tests have been done on a Fiat 1,3 diesel engine with particulate filter with the cyclone below to order on the internet. Installation upstream of the air filter. After a few trips, it is difficult to say if there has been a gain in power and the instantaneous consumption displayed on the computer does not seem to have changed.
IMG_20210128_150944.jpg
1 x
User avatar
nikolaj
I understand econologic
I understand econologic
posts: 173
Registration: 17/08/17, 18:38
Location: 35120 picking ring
x 14

Re: A fuel-saving vortex turbulator: WITH




by nikolaj » 15/04/21, 16:37

hello Gildas and all, and thank you for your test with an industrial cyclone ... what price did you pay, without transport, and with transport? through multiple experiments, several cyclones are necessary to optimize the vehicles, each cyclone takes over from its previous one ... and there, the users of 1 cyclone are able to control their consumption over 1000 km, those who have several, although faster, over 200 km ...
cordially.
0 x
A mystery only perpetuates when there is refusal to study it (Georges Charpak?)
User avatar
gildas
Grand Econologue
Grand Econologue
posts: 879
Registration: 05/03/10, 23:59
x 173

Re: A fuel-saving vortex turbulator: WITH




by gildas » 15/04/21, 17:01

Around € 10, free delivery.

Screenshot_2021-04-15-16-56-22-251_com.android.chrome.jpg
0 x
User avatar
nikolaj
I understand econologic
I understand econologic
posts: 173
Registration: 17/08/17, 18:38
Location: 35120 picking ring
x 14

Re: A fuel-saving vortex turbulator: WITH




by nikolaj » 15/04/21, 20:04

good evening gildas, thank you for your answer, here in France, our "hand made" cyclones are at 20 euros minimum price (voluntary prices in sponsorship and research and technological applications), purchase of stainless steel sheets, machining, and small consumable tools , polishing, rolling and fitting ... tailor-made, with choice of the number of blades, choice of blade angles, with or without winglets, etc ... it's like made-to-measure shoes, or clothes for tailors / dressmakers ...
Attachments
20190328_152241.jpg
20190315_184020.jpg
peugeot expert cyclone 74 mm 65 ° angle (2) .jpg
20200515_095146.jpg
0 x
A mystery only perpetuates when there is refusal to study it (Georges Charpak?)

 


  • Similar topics
    Replies
    views
    Last message

Back to "Special motors, patents, fuel consumption reduction"

Who is online ?

Users browsing this forum : No registered users and 172 guests