STAR VORTEX CYCLONES

[nikolaj]

OUR ASSOCIATION HAS PROGRESSED A LOT... Our star cyclone models with exit fins have very promising results... everyone can copy our models, and for the cost price, we remain capped at 30 euros per cyclone, at non-profit, if you make them according to our models, please respect this very affordable price...

FUEL SAVERS AND DEPOLLUTION (Facebook page) or email contact: nikolaj.palahniuk@yahoo.fr

ECONOMIC ECOLOGICAL AERODYNAMIC AIR CYCLONES (CAA É. É) FREE ASSOCIATION:
(Subject of the page) tailor-made: for all types of vehicles with thermal engines, diesel, ethanol, gasoline, LPG, LNG, CNG, BIO CNG, cars, vans, campers, buses, tractors, boats, construction machinery and public works, heavy goods vehicles, motorcycles, quads, scooters, lawn mowers etc… telephone or text: 06 78 36 93 96 nikolaj palahniuk 1 rue des masses 35120 bander pican

please how to insert an image or photo?

[nikolaj]

https://www.facebook.com/palahniuk.nikolaj/photos

https://www.facebook.com/palahniuk.nikolaj/videos

[gildas]

Hello Nicolaj,
To insert an image, I go to Chrome, I connect to the site, you must select "reply", then click on the "insert a file or image" button, once the image is downloaded, you must click in the window as if we were writing, then "insert in line" then send.
In the past it worked well...

[nikolaj]

Hello Nicolaj,
To insert an image, I go to Chrome, I connect to the site, you must select "reply", then click on the "insert a file or image" button, once the image is downloaded, you must click in the window as if we were writing, then "insert in line" then send.
In the past it worked well...


Screenshot_2024-08-25-14-16-03-387_com.android.chrome.jpg

thank you I will try...but maybe there is a simpler method?

[gildas]

There I just right-clicked on the Facebook image and in the window “copy the link address” then pasted on the econologie messaging service.
You have to turn the text blue with the mouse and click at the top of the message "insert an image" and finally send (or preview if you are not sure)
You spend too many hours in the workshop

[nikolaj]

workshop work is very useful for establishing quotes and methods, so that the padawans who will take over the project can quite easily create these high-performance star cyclones...
thank you for the explanations for the photos...
nikolaj

[Janic]

nikolaj » 25/08/24, 21:23 p.m.

workshop work is very useful for establishing quotes and methods, SO THAT THE PADAWANS WHO WILL TAKE OVER THE PROJECT CAN REALIZE these high-performance star cyclones quite easily...

Well done, I couldn't have said it better! To be referred to the subject on evolution.
Otherwise, great achievements, but I don't see where and how a vortex would be produced with this kind of object?
However, it remains interesting in the sense that the ambient air, with laminar flow, passing through the various pipes and depending on the flow speed, transforms into turbulent flow opposing the proper flow of the air fluid.
For example, a crowd locked in a room and rushing to the exit because of a fire alarm. Result in traffic jams at this exit, everyone wanting to go before the others. But if you replace this single exit with gates with reduced passage but equivalent in total to the single passage, the traffic jam is reduced and becomes more fluid.
It seems to me that this is what you obtain with your star system, which improves this fluidity by transforming it from laminar which has become turbulent into laminar again, but which is no longer vortex. The idea is not bad anyway, since the results are there because as Auguste Lumière said: “ Single source experience of truth »

[GuyGadeboisTheBack]

nikolaj » 25/08/24, 21:23 p.m.

workshop work is very useful for establishing quotes and methods, SO THAT THE PADAWANS WHO WILL TAKE OVER THE PROJECT CAN REALIZE these high-performance star cyclones quite easily...

Well done, I couldn't have said it better! To be referred to the subject on evolution.

It is true that everyone can verify the theory of evolution in their workshop. Just put some paper clips in a bag, wiggle and see that they don't form a chain, for example.

Otherwise, where can we buy these “vortices”?

[nikolaj]

nikolaj » 25/08/24, 21:23 p.m.

workshop work is very useful for establishing quotes and methods, SO THAT THE PADAWANS WHO WILL TAKE OVER THE PROJECT CAN REALIZE these high-performance star cyclones quite easily...

Well done, I couldn't have said it better! To be referred to the subject on evolution.
Otherwise, great achievements, but I don't see where and how a vortex would be produced with this kind of object?
However, it remains interesting in the sense that the ambient air, with laminar flow, passing through the various pipes and depending on the flow speed, transforms into turbulent flow opposing the proper flow of the air fluid.
For example, a crowd locked in a room and rushing to the exit because of a fire alarm. Result in traffic jams at this exit, everyone wanting to go before the others. But if you replace this single exit with gates with reduced passage but equivalent in total to the single passage, the traffic jam is reduced and becomes more fluid.
It seems to me that this is what you obtain with your star system, which improves this fluidity by transforming it from laminar which has become turbulent into laminar again, but which is no longer vortex. The idea is not bad anyway, since the results are there because as Auguste Lumière said: “ Single source experience of truth »

hello, thank you for your opinions, in fact, the cyclonic vortices are produced by the fins curved at approximately 15° at the end of the curved profiles, which are corridors for the circulation of air sucked in by the engines and blown by the turbos. ..and the air flows, in the center, cause continuous thrusts towards the intake chambers...this is not very complicated, but it takes time to achieve, without burrs and to polish, then to roll to the desired dimensions, this is why I had to make several dies, or molds to form the stainless steel or zinc or galvanized sheets...

[nikolaj]

nikolaj » 25/08/24, 21:23 p.m.

workshop work is very useful for establishing quotes and methods, SO THAT THE PADAWANS WHO WILL TAKE OVER THE PROJECT CAN REALIZE these high-performance star cyclones quite easily...

Well done, I couldn't have said it better! To be referred to the subject on evolution.

It is true that everyone can verify the theory of evolution in their workshop. Just put some paper clips in a bag, wiggle and see that they don't form a chain, for example.

Otherwise, where can we buy these “vortices”?

hello, thank you for your interest in these technologies, I manufacture them to measure in my small workshop, at home, I do not sell them, but I accept a contribution of 30 euros per cyclone, which allows me to restock the sheets stainless steel, in 0,4 0,5 0,6 0,8 and 1 mm thicknesses, and to pay the EDF, because machining requires electricity for my small machines...
our association also allows you to copy our models and our technologies, for people who know or want to make their own star cyclones, see the photos and videos on my Facebook page...
if you have a project, please go through my mailbox, it's easier to send photos and quotes, and exchange privately...
cordially
nikolaj