Who can explain to me the method to have an optimal setting for saving pellets because I have the impression that the granule is not that economical
Thank you
Optimal setting pellmatic okofen
Re: optimal setting pellmatic okofen
there is on this forum several hundred pages devoted to these okofen boilers. I myself contributed for a long time to compensate for the lack of professionalism of the boiler sellers and installers who, once the boiler is installed with "factory" parameters, don't give a damn whether it works at optimum or not.
I invite you therefore to look into this problem too, to read what we do those who before you have cleared the ground. indeed, the question is not as simple as your question might suggest.
I invite you therefore to look into this problem too, to read what we do those who before you have cleared the ground. indeed, the question is not as simple as your question might suggest.
0 x
Re: optimal setting pellmatic okofen
I ask that because a colleague tells me that it is not possible that I pass 6tonnes of Pellet this winter
He tells me that for 183m2 it's more like 3 or 4
I do not know laughed and you?
He tells me that for 183m2 it's more like 3 or 4
I do not know laughed and you?
0 x
Re: optimal setting pellmatic okofen
without knowing more about your installation, it will be hard to help you.
type of insulation, recent house or not, type of heating before the pellets (in case of replacement),
consumption before the pellets (quantity of fuel oil for example if before it was fuel oil) ... etc ...
type of insulation, recent house or not, type of heating before the pellets (in case of replacement),
consumption before the pellets (quantity of fuel oil for example if before it was fuel oil) ... etc ...
0 x
Re: optimal setting pellmatic okofen
to tell you if your consumption is normal or excessive you have to know where you live, at what altitude the type of insulation and ideally the conso before the passage to pellets (oil, gas, elec or wood)
0 x
-
- Similar topics
- Replies
- views
- Last message
-
- 6 Replies
- 423 views
-
Last message by izentrop
View the latest post
24/10/24, 19:55A subject posted in the forum : Heating, insulation, ventilation, VMC, cooling ...
-
- 10 Replies
- 6478 views
-
Last message by Clemclem
View the latest post
26/12/23, 11:05A subject posted in the forum : Heating, insulation, ventilation, VMC, cooling ...
-
- 8 Replies
- 5257 views
-
Last message by role
View the latest post
05/11/24, 19:56A subject posted in the forum : Heating, insulation, ventilation, VMC, cooling ...
-
- 33 Replies
- 10279 views
-
Last message by Obamot
View the latest post
25/02/23, 19:49A subject posted in the forum : Heating, insulation, ventilation, VMC, cooling ...
-
- 2 Replies
- 4309 views
-
Last message by Cocktail07
View the latest post
03/01/23, 19:54A subject posted in the forum : Heating, insulation, ventilation, VMC, cooling ...
Back to "Heating, insulation, ventilation, VMC, cooling ..."
Who is online ?
Users browsing this forum : No registered users and 360 guests