Problem of access to the site with FREE / Proxad?

[Grald]

Hello, I have free adsl (sagem 800 modem), eastern Paris region. I can only pass with free secour (internal low speed modem). I tried http://80.247.227.184/ but nothing to do.
If these indications can help ...

[skrymir]

Hello

I am at free with the freebox router mode activated.

econology works again

My new dns are

212.27.53.252

212.27.54.252

[denis]

on cegetel 512, it works; it paddles, because of traffic

[Christophe]

Hello, I have free adsl (sagem 800 modem), eastern Paris region. I can only pass with free secour (internal low speed modem). I tried http://80.247.227.184/ but nothing to do.
If these indications can help ...

Pfff again thank you Free !!!
It helps in the sense that it means that it is not ONLY the DNS of Free that is problematic.
No doubt a problem of connectivity between our host and Free ...

Does this site work (it is that of my host precisely) since your connection: http://www.nfrance.com/ ?

on cegetel 512, it works; it paddles, because of traffic

Uh what do you mean by this row because of the traffic? That of econology or that of cegetel? Because that of econo there is margin (in theory) compared to the capacities of the server ...

[Former Oceano]

At Free for years, with FBX 4 in router + WiFi mode, I had some connection problems too. Besides, you saw me less

But it works flawless there so I found myself!

[Grald]

Bjr Christophe, on adsl I can have the site http://www.nfrance.com/ no problem ...

[Christophe]

Bjr Christophe, on adsl I can have the site http://www.nfrance.com/ no problem ...

Well, it's the same "network" (clean room of accommodation) ... There is therefore no reason in theory that econologie.com does not work in this case ... I dry it!

[nlc]

I really have no problem with Free.

To try to solve the bp:

If you are under Linux, try in a shell the command traceroute www.econologie.com, and post the result here.

If you are on windaube, open a console and issue the command tracert www.econologie.com

It can be useful to see where the bp comes from. On the other hand, it is obviously necessary to type the command when you have a connection problem. Then you have to save the result (copy / paste) to post it when it works

[Obelix]

Hello everyone,

That's it, it's fixed, I can connect again to forum from home !!
THE PROBLEM:
Free has changed the DNS addresses for my sector. Normally it's transparent, but with me it puts the souk!
Maybe I have misconfigured my connections ??

SOLUTION:
Make the connection as simple as possible.
No router on the Box. Automatic IP address.
Read the DNS addresses on Windows (with winipcfg).
Then reconfigure according to your wishes.

Here it works and even well

Obelix

[Christophe]

Here it works and even well

Isn't that what I advised you to do from the start?
But as you're a bit of a mule you didn't listen to me!