With which compiler did you write the code?
To all those who made the kit, did you make the PCB yourself?
Building your own kit to run on ethanol E85
radi wrote:With which compiler did you write the code?
To all those who made the kit, did you make the PCB yourself?
Hello
I ordered here http://etronics.free.fr/boutique/boutique.htm for a misery!
0 x
I ask myself a question about the tension that the injector takes when opening ...
The rated voltage + injector = 14V
Dimensioned voltage - injector = mos drain voltage (peak at 80V at opening)
So the injector ends up with a peak of -66V at these terminals (14V-80V).
Doesn't it risk to deteriorate it, to see to burn it?
The rated voltage + injector = 14V
Dimensioned voltage - injector = mos drain voltage (peak at 80V at opening)
So the injector ends up with a peak of -66V at these terminals (14V-80V).
Doesn't it risk to deteriorate it, to see to burn it?
0 x
Re: Build your own kit to run on E85 ethanol
Hello,
Is this kit still relevant?
did you try with an arduino? it might be simpler on the hardware side, right?
A+
Thierry
Is this kit still relevant?
did you try with an arduino? it might be simpler on the hardware side, right?
A+
Thierry
0 x
-
- I discovered econologic
- posts: 1
- Registration: 15/04/22, 02:49
Re: Build your own kit to run on E85 ethanol
lebritish wrote:Hello,
Is this kit still relevant?
did you try with an arduino? it might be simpler on the hardware side, right?
A+
Thierry
Hi lebritish. I answer a long time later, but yes someone took the code to make it an arduino code. I'm trying to make a box out of this.
I don't understand everything in the code, and not sure it works, but it's already an interesting base.
I wanted to come and put the info on your forum because I too landed here and asked myself the question of the arduino!
So the Mr has two versions: a classic where the injector control is connected to the kit, which re-emits an altered signal. And a "simplified" version where the injectors are controlled in parallel.
Classic version: https://umaguma49.blogspot.com/2019/11/ ... duino.html
Simplified version (parallel): https://umaguma49.blogspot.com/2019/11/ ... ifiee.html
0 x
Back to "biofuels, biofuels, biofuels, BtL, non-fossil alternative fuels ..."
Who is online ?
Users browsing this forum : No registered users and 241 guests