scoop oil burner with max recycling

[bidouille23]

Evening re,

Manoria yes thank you for the venturi thing it's giant, I'll be able to do a quick test with something that trots in my head, maybe you have to try:

you put the ball system in a box, you spray in the box and you pump by a venturi system like that (as with the pantone system in fact;) if I'm not mistaken;)).
Result it should be that very fine fog sucked, now the mix can it be rich enough to make a beautiful flame ??? to try can be no ??

And for the double reduction, well enough for the re-aspiration of gases actually mmm cool.

A question if in the center of the double reduction have put an iron rod what is happening ???

see you

[manoria68]

With an iron rod in the middle, it becomes blue. that's all, but it's useless.

Venturi is in my opinion the key solution for recycling hot gases

[bidouille23]

hello Mano and everyone, the form I hope.

200% agree with the venturi I buy two reduction scrap welded solder and head spade it will make a superb double cone .

But before the injection in the double cone a vortex (just at the exit of the AF (I came across a thesis on the flame lifted (our case here if I'm not mistaken, and the vortex is the chosen solution for a good mixture and a flame that does not pick up (although in my case the stall is hard he also talks about the effect of sound wave at different frequnce emitted by a speaker with an amps of 130 W;) I will end up doing this test of his is promised, not immediately right now but it is necessary at least try)

http://web.univ-ubs.fr/limatb/EG2M/Disc ... s/a386.pdf

like what I do not know much in thermal but my idea was far from stupid, depending on the frequencies played on different part of the flame (in relation to the wavelength of each frequency I think no ??) , and to 100 500 Hz basically for their test their conclusion is as follows:

"The case of zone (3) makes it possible to prevent snagging
while improving combustion: the disadvantages of non-premixed flushes
are thus discarded "

;) so business to follow, but first venturi.

I think to weld the two cones together and just make a piercing underneath as in the diagram you gave, normally there should be suction even if there is no tube or it is absolutely necessary to put a cut tube bevel to create depression ???

thank you and see you soon for photo and editing

[bidouille23]

Re, following on the venturi:

http://philippe.berger2.free.fr/automat ... tiques.htm

below ;) .

a +

[boubka]

Hello everyone
if you want more doc on venturi, search with the term: ejector or thermocompressor

[bidouille23]

hello, and thank you Boubka for the info, I'm going to look for that, I'll be educated (It's normal it's spring and I grow my garden).

see you