Help for getting started in 3D printing Elegoo Neptune 3
-
- I learn econologic
- posts: 36
- Registration: 04/11/22, 21:14
- x 6
Re: Help for getting started in 3D printing Elegoo Neptune 3
Can you tell me where I can consult the charter and the rules of the forum so that I can check whether these kinds of political discussions are undesirable here?
I'm thinking of talking to a friend who works in high places, and it would be frowned upon to delete my messages, I'll raise my voice.
I'm thinking of talking to a friend who works in high places, and it would be frowned upon to delete my messages, I'll raise my voice.
0 x
-
- I learn econologic
- posts: 36
- Registration: 04/11/22, 21:14
- x 6
Re: Help for getting started in 3D printing Elegoo Neptune 3
Your controversy over the Macron and Ukraine posts DOES NOT CONCERN ME SO PLEASE WASH YOUR DIRTY LAUNDRY WITH YOUR FAMILY
It confirms my opinion on this site, tomorrow during office hours I might get angry like 'general information service' because I have two friends there
It confirms my opinion on this site, tomorrow during office hours I might get angry like 'general information service' because I have two friends there
0 x
-
- Moderator
- posts: 79126
- Registration: 10/02/03, 14:06
- Location: Greenhouse planet
- x 10974
Re: Help for getting started in 3D printing Elegoo Neptune 3
But keskidi?
If you want to complain do it directly to those responsible for the little rotting of your subject!
We've had much worse…that's democracy…does that pose a problem for you?
If you want to complain do it directly to those responsible for the little rotting of your subject!
We've had much worse…that's democracy…does that pose a problem for you?
0 x
Do a image search or an text search - Netiquette of forum
-
- I learn econologic
- posts: 36
- Registration: 04/11/22, 21:14
- x 6
Re: Help for getting started in 3D printing Elegoo Neptune 3
What an intellectual level!!!
Are you a moderator or a sucker? I ask you to tell me where to consult the charter and the rules of the site, I take it very badly, and it is not M....n who will help you!
Are you a moderator or a sucker? I ask you to tell me where to consult the charter and the rules of the site, I take it very badly, and it is not M....n who will help you!
0 x
Re: Help for getting started in 3D printing Elegoo Neptune 3
it would be nice to come back to the subject, to avoid HS and bickering.
Goods.
Goods.
1 x
-
- I learn econologic
- posts: 36
- Registration: 04/11/22, 21:14
- x 6
-
- I learn econologic
- posts: 36
- Registration: 04/11/22, 21:14
- x 6
Re: Help for getting started in 3D printing Elegoo Neptune 3
Hi,
Ah ah ah since my remarks you have opted for a method that would anger Elon Musk, a nice ploy that does not necessarily increase "constructive" participation, I am not a 3-week-old rabbit
Ah ah ah since my remarks you have opted for a method that would anger Elon Musk, a nice ploy that does not necessarily increase "constructive" participation, I am not a 3-week-old rabbit
0 x
Re: Help for getting started in 3D printing Elegoo Neptune 3
I can't advise you at all because I don't know the subject.
but I hope that the discussions will be profitable.
but I hope that the discussions will be profitable.
0 x
-
- I learn econologic
- posts: 36
- Registration: 04/11/22, 21:14
- x 6
Re: Help for getting started in 3D printing Elegoo Neptune 3
Oh I don't know if it will progress, in any case I don't expect anything from the 12 to 16 guests present almost permanently for only a few days!!! Good with at least 3 possible browsers, it only takes 4 virtual machines to "complete" this task, I'm not fooled.
On the other hand, when it comes to providing judicious and detailed assistance, that's another thing!
Finally for the moment I am working on two electronic projects, so study, creation of the diagram and the printed circuit, embedded software in C..
One will go in a commercial ABS case, at Conrad, I've used a 3-digit amount already, and the other should go in what I want to design in 3D with my brand new Elegoo never plugged in and make at me at the beginning, and if the product pleases I will have it done by professionals.
Here
On the other hand, when it comes to providing judicious and detailed assistance, that's another thing!
Finally for the moment I am working on two electronic projects, so study, creation of the diagram and the printed circuit, embedded software in C..
One will go in a commercial ABS case, at Conrad, I've used a 3-digit amount already, and the other should go in what I want to design in 3D with my brand new Elegoo never plugged in and make at me at the beginning, and if the product pleases I will have it done by professionals.
Here
1 x
-
- I learn econologic
- posts: 36
- Registration: 04/11/22, 21:14
- x 6
Re: Help for getting started in 3D printing Elegoo Neptune 3
By the way, does anyone have an opinion on M4 Personal???
0 x
Who is online ?
Users browsing this forum : No registered users and 27 guests