Help for getting started in 3D printing Elegoo Neptune 3

Forum dedicated to 3D printing: 3D printing technologies (fdm, lcd, sla ...), hardware, software, slicers, settings, use, database, model exchange, tips and tricks, optimization, exchange of experiences...
sicetaitsimple
Econologue expert
Econologue expert
posts: 9773
Registration: 31/10/16, 18:51
Location: Lower Normandy
x 2638

Re: Help for getting started in 3D printing Elegoo Neptune 3




by sicetaitsimple » 13/11/22, 17:50

Christophe wrote:Don't be smart, we know for whom and what you're riding here!
And so ? What's your message?

It's not a message, it's a question, to you the Webmaster, following:
nothing obliges you to take part in the political subjects... but it would be said that it is all the same your hobby! It's funny that: why participate in subjects that you denounce so much
So, how many interventions from me on the "Macron" thread and the "Ukraine" thread, since they would be my "hobby"?
0 x
Christophe
Moderator
Moderator
posts: 79120
Registration: 10/02/03, 14:06
Location: Greenhouse planet
x 10973

Re: Help for getting started in 3D printing Elegoo Neptune 3




by Christophe » 13/11/22, 17:57

Do you have memory problems? : Shock: : Shock: : Shock: : Shock:

You posted 4 messages about Ukraine just yesterday afternoon:

Screenshot 2022-11-13 at 17-57-02 Search.png


Here to refresh your memory: sicetaitsimple-u19360 / posts /
0 x
sicetaitsimple
Econologue expert
Econologue expert
posts: 9773
Registration: 31/10/16, 18:51
Location: Lower Normandy
x 2638

Re: Help for getting started in 3D printing Elegoo Neptune 3




by sicetaitsimple » 13/11/22, 18:01

Christophe wrote:You posted 4 messages about Ukraine just yesterday afternoon:

Yes.. And over the past year?
0 x
Christophe
Moderator
Moderator
posts: 79120
Registration: 10/02/03, 14:06
Location: Greenhouse planet
x 10973

Re: Help for getting started in 3D printing Elegoo Neptune 3




by Christophe » 13/11/22, 18:40

What do I have to do, do you think? Ask Obamot, he's the archive specialist... : Lol:

So you want us to believe that by chance... you would have posted 4 political messages yesterday and not at all elsewhere in 2022? : Lol: : Lol: : Lol:

Come on baby!!!

Hold on Macron your last message dates from November 8:

Screenshot 2022-11-13 at 18-41-08 Search.png
Screenshot 2022-11-13 at 18-41-08 Search.png (43.65 KiB) Viewed 656 times


Have you thought about doing a memory diagnostic? : Mrgreen: : Mrgreen: : Mrgreen:
0 x
sicetaitsimple
Econologue expert
Econologue expert
posts: 9773
Registration: 31/10/16, 18:51
Location: Lower Normandy
x 2638

Re: Help for getting started in 3D printing Elegoo Neptune 3




by sicetaitsimple » 13/11/22, 18:56

Christophe wrote:Have you thought about doing a memory diagnostic?


Absolutely no need!
So, the figures for my interventions on the "Macron" thread and on the "Ukraine" thread over a year, are they coming?
0 x
Christophe
Moderator
Moderator
posts: 79120
Registration: 10/02/03, 14:06
Location: Greenhouse planet
x 10973

Re: Help for getting started in 3D printing Elegoo Neptune 3




by Christophe » 13/11/22, 19:12

VTFF! : Evil: : Mrgreen:

You're heavy... You posted 135 messages containing the word Ukraine in the title or the message...

Screenshot 2022-11-13 at 19-15-01 Search.png
Screenshot 2022-11-13 at 19-15-01 Search.png (90.79 KiB) Viewed 645 times
0 x
SENIOR ELECTRONICIAN
I learn econologic
I learn econologic
posts: 36
Registration: 04/11/22, 21:14
x 6

Re: Help for getting started in 3D printing Elegoo Neptune 3




by SENIOR ELECTRONICIAN » 13/11/22, 19:14

It is true that the level is really low here!
Finally if they only have this kind of area of ​​discussion it is disappointing.
0 x
Christophe
Moderator
Moderator
posts: 79120
Registration: 10/02/03, 14:06
Location: Greenhouse planet
x 10973

Re: Help for getting started in 3D printing Elegoo Neptune 3




by Christophe » 13/11/22, 19:15

Don't ask too much of Dopey!

So your slicer? Does it run under DOS? : Lol: : Lol: : Lol:
0 x
SENIOR ELECTRONICIAN
I learn econologic
I learn econologic
posts: 36
Registration: 04/11/22, 21:14
x 6

Re: Help for getting started in 3D printing Elegoo Neptune 3




by SENIOR ELECTRONICIAN » 13/11/22, 19:27

Christophe at first you seemed interesting and constructive but you hid your game well, you disappoint me greatly!!

As for your disparaging remark about senior grandpas, there are quite a few who have a lot more education, skills, and experience than you might think, so you probably don't.

FYI, I had a science baccalaureate with honors, an electronics engineer eligible for Supélec, and with more than 40 years of experience in the industry, six patents filed in my career plus three Soleau envelopes. And before DOS I programmed in assembler on a wide range of processors.

And regarding the forum FS Generations, we can look at the number of users connected, and the number of open messages and replies that arrive daily, there is no comparison possible.
0 x
sicetaitsimple
Econologue expert
Econologue expert
posts: 9773
Registration: 31/10/16, 18:51
Location: Lower Normandy
x 2638

Re: Help for getting started in 3D printing Elegoo Neptune 3




by sicetaitsimple » 13/11/22, 19:32

Christophe wrote:
You're heavy... You posted 135 messages containing the word Ukraine in the title or the message...



Ah yes, 135 out of more than 5000 since the beginning, that really impresses me!
Do you have statistics for other members? A sort of hit parade? Thanks in advance.
0 x

Go back to "3D printers and 3D print: machines and technologies, hardware, software, use and optimization"

Who is online ?

Users browsing this forum : No registered users and 28 guests