Help for getting started in 3D printing Elegoo Neptune 3

Forum dedicated to 3D printing: 3D printing technologies (fdm, lcd, sla ...), hardware, software, slicers, settings, use, database, model exchange, tips and tricks, optimization, exchange of experiences...
phil59
Econologue expert
Econologue expert
posts: 2212
Registration: 09/02/20, 10:42
x 504

Re: Help for getting started in 3D printing Elegoo Neptune 3




by phil59 » 07/11/22, 20:05

Even if a lot of things work on a new config, I agree with you, not everything works, or very badly.

Wanting everything centralized, even with VMs, is not necessarily possible.

After also sometimes, limitations no dongle, kind in parallel port, for example.

Already the USB RS232 converters do not pass with everything ...

And also does not necessarily pass with RDP ... that's next.
0 x
hmmmmm, hmmmmmmmmmmmmm, hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhmmmmmmmmm, huh, hmmmmmmmmmmmmm.

: Oops: : Cry: :( : Shock:
Christophe
Moderator
Moderator
posts: 79121
Registration: 10/02/03, 14:06
Location: Greenhouse planet
x 10973

Re: Help for getting started in 3D printing Elegoo Neptune 3




by Christophe » 07/11/22, 20:10

SENIOR ELECTRONICIAN wrote:I still have an old desktop NCR, with DOS 6.2 and low RAM!!! I just removed the tube screen to put an lcd.


: Shock:

An old LCD with a VGA port I presume? : Lol:

And the slicer it runs under DOS you think? : Lol:

I'm going to drop the case soon...
0 x
phil59
Econologue expert
Econologue expert
posts: 2212
Registration: 09/02/20, 10:42
x 504

Re: Help for getting started in 3D printing Elegoo Neptune 3




by phil59 » 07/11/22, 21:24

You get discouraged easily.

Maybe a new machine would be good, but probably not before exploring several avenues.

To see in the registry what there would be to clean, before wanting to reinstall this software.

Sometimes silly things get in the way.

At the time, for example, I had a font that blocked word 2 .... Bug, not planned ....

a mouse driver that blocked, even after rebooting the machine. Only the total shutdown with power off allowed to solve this problem...
0 x
hmmmmm, hmmmmmmmmmmmmm, hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhmmmmmmmmm, huh, hmmmmmmmmmmmmm.

: Oops: : Cry: :( : Shock:
SENIOR ELECTRONICIAN
I learn econologic
I learn econologic
posts: 36
Registration: 04/11/22, 21:14
x 6

Re: Help for getting started in 3D printing Elegoo Neptune 3




by SENIOR ELECTRONICIAN » 11/11/22, 19:25

It could run on a Thomson TO9 probably or on a MO5!!!
0 x
SENIOR ELECTRONICIAN
I learn econologic
I learn econologic
posts: 36
Registration: 04/11/22, 21:14
x 6

Re: Help for getting started in 3D printing Elegoo Neptune 3




by SENIOR ELECTRONICIAN » 12/11/22, 21:02

I think the forum fs generations (or futura sciences) is more frequented and of a better intellectual level!!!
0 x
sicetaitsimple
Econologue expert
Econologue expert
posts: 9774
Registration: 31/10/16, 18:51
Location: Lower Normandy
x 2638

Re: Help for getting started in 3D printing Elegoo Neptune 3




by sicetaitsimple » 12/11/22, 21:25

SENIOR ELECTRONICIAN wrote:I think the forum fs generations (or futura sciences) is more frequented and of a better intellectual level!!!

Yes, you are wrong! A few years ago it might have been different...
Currently the themes are:
- Macron is shit
- Ukrainian Ukro-Nazis will be ravaged by Russia

Apparently it's econology... Well, I'd have to look at the definition again...
1 x
Christophe
Moderator
Moderator
posts: 79121
Registration: 10/02/03, 14:06
Location: Greenhouse planet
x 10973

Re: Help for getting started in 3D printing Elegoo Neptune 3




by Christophe » 13/11/22, 13:44

SENIOR ELECTRONICIAN wrote:I think the forum fs generations (or futura sciences) is more frequented and of a better intellectual level!!!


Blablbabla...but of course go ahead and tell us what!

Because with the same argument and mentality ("I want to keep my old computer dung and you are jerks to offer me recent apps that don't run on it"...to sum up) you would have the same answers... No you won't be able to run his Slicer under DOS...

Keep us in touch ! Good luck ! 8)

Besides, you voluntarily deny my question for several messages: did you manage to launch it?
0 x
Christophe
Moderator
Moderator
posts: 79121
Registration: 10/02/03, 14:06
Location: Greenhouse planet
x 10973

Re: Help for getting started in 3D printing Elegoo Neptune 3




by Christophe » 13/11/22, 13:46

sicetaitsimple wrote:
SENIOR ELECTRONICIAN wrote:I think the forum fs generations (or futura sciences) is more frequented and of a better intellectual level!!!

Yes, you are wrong! A few years ago it might have been different...
Currently the themes are:
- Macron is shit
- Ukrainian Ukro-Nazis will be ravaged by Russia

Apparently it's econology... Well, I'd have to look at the definition again...


Defamation are plenty of other good topics at the moment and nothing forces you to participate in political topics... but it seems like it's still your hobby! It's funny that: why participate in subjects that you denounce so much? : Lol: : Lol: : Lol: : Lol:

Otherwise Macron is indeed acting like shit for the interests of the nation and the French people... but it may be in your interest to preserve his behavior? Traitors exist...
0 x
sicetaitsimple
Econologue expert
Econologue expert
posts: 9774
Registration: 31/10/16, 18:51
Location: Lower Normandy
x 2638

Re: Help for getting started in 3D printing Elegoo Neptune 3




by sicetaitsimple » 13/11/22, 14:31

Christophe wrote:[
Defamation are plenty of other good topics at the moment and nothing forces you to participate in political topics... but it seems like it's still your hobby! It's funny that: why participate in subjects that you denounce so much? : Lol: : Lol: : Lol: : Lol:

Oh good? Which good topics? Have you seen new members arriving and posting regularly? Apart from Phil59 who tells us about his daily adventures and misadventures, I don't see.
As for my interventions on the son "Macron" and "Ukraine", which would be my "dada", thank you to you who must have that within reach of click to specify the number to me compared to the 3420 posts "Macron" and 5000 posts "Ukraine".
0 x
Christophe
Moderator
Moderator
posts: 79121
Registration: 10/02/03, 14:06
Location: Greenhouse planet
x 10973

Re: Help for getting started in 3D printing Elegoo Neptune 3




by Christophe » 13/11/22, 17:34

Don't be smart, we know for whom and what you're riding here!

And so ? What's your message?

If you say the forum has become shitty (among other things YOUR fault), don't be surprised that it doesn't motivate newcomers...

QED

ps: the new ones like senior grandpa, no thank you... : Mrgreen:
0 x

Go back to "3D printers and 3D print: machines and technologies, hardware, software, use and optimization"

Who is online ?

Users browsing this forum : No registered users and 37 guests